Special Geometry Cutters

Cutting Tools

cutter_diameter

cutting_direction

end_mill_type

finishcoating

flute_length

flute_type

helix_angle

material

number_of_flutes

number_of_flutesmm

overall_lengthmm

plunge_type

shank_diameter

shank_type

brand

categoryId

stockStatus

Milling

Aluminium Geometry Cutters

Kennedy

Short Series - 2 Flute - Metric
Centre cutting as standard. An advanced tool geometry designed for cutting aluminium and other non-metallic, non-ferrous materials requiring high machining rates. Al-Karb cutters will out-perform conventional end mills on these material­s as the flute design allows maximum chip removal.

Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080.

Carbide Plain Shank Al-Karb Ultrafine Micrograin Milling Cutters Slot Drills for Aluminium, 2 Flute: Short Series, Metric

3mm, Short, Slot Drill, Solid Carbide, Uncoated

4mm, Short, Slot Drill, Solid Carbide, Uncoated

6mm, Short, Slot Drill, Solid Carbide, Uncoated

8mm, Short, Slot Drill, Solid Carbide, Uncoated

10mm, Short, Slot Drill, Solid Carbide, Uncoated

12mm, Short, Slot Drill, Solid Carbide, Uncoated

High Helix Cutters

SwissTech

Series 13 - Regular Series 
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.

Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

HSS-Co 8% Weldon Shank 50° High Helix End Mills 3 Flute: Series 13, Regular - Uncoated

50°, High Helix Cutters, 10.0mm, 3 fl, Cobalt High Speed Steel, Uncoated

Series 13 - Regular Series, TiCN Coated
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.

Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

HSS-Co 8% Weldon Shank 50° High Helix End Mills 3 Flute: Series 13, Regular - TiCN Coated

6.0 50DEG WELDON STD HIGH HELIX E/MILL-TICN-8% CO

Series 15 - Regular Length 
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Shank cutting diameter to +0.04  -0.0.

Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

HSS-Co 8% Weldon Shank 42° High Helix Slot Drills 2 Flute For Aluminium: Series 15, Regular - Uncoated

3mm, Regular, Slot Drill, Cobalt High Speed Steel, Uncoated

4mm, Regular, Slot Drill, Cobalt High Speed Steel, Uncoated

5mm, Regular, Slot Drill, Cobalt High Speed Steel, Uncoated

6mm, Regular, Slot Drill, Cobalt High Speed Steel, Uncoated

8mm, Regular, Slot Drill, Cobalt High Speed Steel, Uncoated

10mm, Regular, Slot Drill, Cobalt High Speed Steel, Uncoated

12mm, Regular, Slot Drill, Cobalt High Speed Steel, Uncoated

16mm, Regular, Slot Drill, Cobalt High Speed Steel, Uncoated

20mm, Regular, Slot Drill, Cobalt High Speed Steel, Uncoated

Series 20 - Regular Length 
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B.  Shank diameter to h6.

Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

HSS-CO 8% Weldon Shank Coarse Pitch 37° High Helix for Aluminium Roughing End Mills 3 Flute: Series 20, Regular - Uncoated

6mm, Regular, End Mill, Cobalt High Speed Steel, Uncoated

8.0 37DEG HIGH HELIX 3FL ROUGH E/MILL-ALUM

16mm, Regular, End Mill, Cobalt High Speed Steel, Uncoated

Series 20 - Regular Length, TiN Coated
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B.  Shank diameter to h6.

Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

HSS-CO 8% Weldon Shank Coarse Pitch 37° High Helix for Aluminium Roughing End Mills 3 Flute: Series 20, Regular - TiN Coated

10mm, Regular, End Mill, Cobalt High Speed Steel, TiN

16mm, Regular, End Mill, Cobalt High Speed Steel, TiN

Series 21 - Long Series 
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Shank diameter to h6.

Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

HSS-CO 8% Weldon Shank Coarse Pitch 37° High Helix for Aluminium Roughing End Mills 3 Flute: Series 21, Long - Uncoated

12.0 37D H/HELIX 3FL ROUGH E/M L/S ALUM

*Number varies according to the number of flutes.

Centre cutting.
To Manufacturers standards.
Cutting diameter to e8.
Shank diameter to h6.
EHQ-6*PR Carbide Q-Coat.
*Number varies according to the number of flutes.

Series 72 - Regular Length


Carbide Plain Shank End Mills High Helix

45°, Hi-Helix End Mill, 6.0mm, 6 fl, Solid Carbide, AlTiN

45°, Hi-Helix End Mill, 8.0mm, 6 fl, Solid Carbide, AlTiN

Special Geometry Cutters

Kennedy

3mm, Short, Slot Drill, Solid Carbide, Uncoated

8 Variations

Kennedy

4mm, Short, Slot Drill, Solid Carbide, Uncoated

8 Variations

Kennedy

6mm, Short, Slot Drill, Solid Carbide, Uncoated

8 Variations

Kennedy

8mm, Short, Slot Drill, Solid Carbide, Uncoated

8 Variations

Kennedy

10mm, Short, Slot Drill, Solid Carbide, Uncoated

8 Variations

Kennedy

12mm, Short, Slot Drill, Solid Carbide, Uncoated

8 Variations

SwissTech

50°, High Helix Cutters, 10.0mm, 3 fl, Cobalt High Speed Steel, Uncoated

4 Variations

SwissTech

6.0 50DEG WELDON STD HIGH HELIX E/MILL-TICN-8% CO

2 Variations

SwissTech

3mm, Regular, Slot Drill, Cobalt High Speed Steel, Uncoated

9 Variations

SwissTech

4mm, Regular, Slot Drill, Cobalt High Speed Steel, Uncoated

9 Variations

SwissTech

5mm, Regular, Slot Drill, Cobalt High Speed Steel, Uncoated

9 Variations

SwissTech

6mm, Regular, Slot Drill, Cobalt High Speed Steel, Uncoated

9 Variations

SwissTech

8mm, Regular, Slot Drill, Cobalt High Speed Steel, Uncoated

9 Variations

SwissTech

10mm, Regular, Slot Drill, Cobalt High Speed Steel, Uncoated

9 Variations

SwissTech

12mm, Regular, Slot Drill, Cobalt High Speed Steel, Uncoated

9 Variations

SwissTech

16mm, Regular, Slot Drill, Cobalt High Speed Steel, Uncoated

9 Variations

SwissTech

20mm, Regular, Slot Drill, Cobalt High Speed Steel, Uncoated

9 Variations

SwissTech

6mm, Regular, End Mill, Cobalt High Speed Steel, Uncoated

6 Variations

SwissTech

8.0 37DEG HIGH HELIX 3FL ROUGH E/MILL-ALUM

6 Variations

SwissTech

16mm, Regular, End Mill, Cobalt High Speed Steel, Uncoated

6 Variations

SwissTech

10mm, Regular, End Mill, Cobalt High Speed Steel, TiN

4 Variations

SwissTech

16mm, Regular, End Mill, Cobalt High Speed Steel, TiN

4 Variations

SwissTech

12.0 37D H/HELIX 3FL ROUGH E/M L/S ALUM

4 Variations

SwissTech

45°, Hi-Helix End Mill, 6.0mm, 6 fl, Solid Carbide, AlTiN

7 Variations

SwissTech

45°, Hi-Helix End Mill, 8.0mm, 6 fl, Solid Carbide, AlTiN

7 Variations

Key Information

Group Policies

© 2024 TED. All rights reserved.Producer Register Limited Number: IE01113WB

© 2024 TED. All rights reserved.
Producer Register Limited Number: IE01113WB