Brake & Clutch Tools

Automotive

product_type

tool_material

brand

categoryId

stockStatus

newProduct

Automotive Tools

Service Tools

Kennedy

FEBK10
Pneumatic fluid extractor for use in draining engine oil, water, fuel and hydraulic fluids from vehicle engines and other mechanical equipment, bleeding brake/clutch fluid and collection of other non-corrosive fluid spillage. High capacity 10ltr fluid reservoir ideal for garage, extension tube storage, used for workshop and on-site use. Supplied with 1500 x 15mm initial tubing with extension tubes; 700 x 6mm, 360 x 10mm, 310 x 6mm and 380mm brake bleeder attachment. Air supply 70-110psi (5-8bar), air consumption 180ltr/min, vacuum (maximum) 500mm HG, extraction rate 2.5ltr/min., air inlet size 1/4” BSP.

Pneumatic Fluid Extractor

PNEUMATIC FLUID EXTRACTOR 10LTR

Alba Diagnostics

Vacuum brake bleeder complete with motor bike attachment and refill bottles. 
One litre capacity. Uses standard workshop air supply. Unique rubber joint for fluid extraction (avoids leaks). Removes fluid via bleed nipples to allow bleeding or entire fluid replacement. Also available: ALB 30591. As above without refill bottles.

Vacuum Brake Bleeder

ALB30558 VACUUM BRAKE BLEEDER KIT

Easy one-person operation. Simple hand-pump operation to create pressure. Portable. Supplied with European cap adaptor. 1.9ltr capacity. With quick release coupling. With pressure release valve.

Easy one-person operation. Simple hand-pump operation to create pressure. Portable. Supplied with European cap adaptor. 3ltr capacity. With quick release coupling. With pressure release valve.

Alba Hand-Operated Pressure Brake Bleeder

ALB30570 HAND/OP. PRESSURE BRAKE BLEEDER

Draper

Ideal for removal and installation of hard to reach brake and headlight springs. 

Features and Benefits
• Manufactured from durable heat treated alloy steel 
• Chemically blacked for corrosion protection

Brake and Headlight Spring Hook

24317 BRAKE & HEADLIGHT SPRING HOOK

This ingenious tool is invaluable in the garage workshop for testing the quality of brake fluid. Testing for moisture content in the fluid by resistance to electric current. You get instant results from the built-in LED indicator light system. (Runs on 1 x 1.5V AAA battery).

Brake Fluid Tester (Battery Operated) 

BRAKE FLUID TESTER AAA 1.5V

Winds back disc brake calipers when replacing brake pads. Professional quality, allows the easy return of brake piston into the caliper. Suitable for most braking systems.

Winds back disc brake calipers when replacing brake pads. Professional quality, allows the easy return of brake piston into the caliper. Suitable for most braking systems. Includes left and right handed thrust bolt assemblies, reaction plate and adaptors. Both kits supplied in carry cases.

Universal Caliper Wind-Back Tool Kits

BRAKE PISTON WIND BACK KIT UNIVERSAL 18-PCE

Retracting brake caliper pistons can be used with ½” square drive ratchet and 21mm hex wrench or spanner and is suitable for use on most cars and motorcycles. Constructed from hardened steel with phosphate finished spreader plates for corrosion protection.

Brake Caliper Spreader

DISC BRAKE SPREADER

Ingenious tool for depressing and holding down the brake pedal whilst carrying out maintenance.

Brake Pedal Depressor

BRAKE PEDAL DEPRESSOR

PBB100
Single man operated pneumatic bleeder which simplifies the bleeding of hydraulic fluid in vehicle clutches and brake systems, also used for the collection of other non-corrosive fluid spillage. Has a 1 litre container with a ¼” NPT connection, operates from 90 - 145psi (6 - 10bar) air pressure with an air consumption rate of 180ltr/min, an extraction rate of 1.6Ltr/min and vacuum (max) of  550mm HG. Handles non-flammable liquids between 0 and 80°C.

Pneumatic Brake & Clutch Bleeder

1LTR BRAKE BLEEDER & FLUID EXTRACTOR

Maximum vacuum: 550mm Hg.
Reservoir capacity: 150ml.

Contents: serviceable metal bodied vacuum pump, reservoir jar, transfer lid, storage lid, 4x lengths of 6mm ID tubing, 1x length of 4mm ID tubing adaptor. Set of brake bleeding adaptors, rubber cup adaptor. Dimensions (W x H x D): 350 x 305 x 80mm. Gross weight: 1.5kg.

Vacuum testing kit that helps to locate and identify faults on cars, motorcycles and commercial vehicles. Supplied in robust blow moulded case. 
Contents: serviceable metal bodied vacuum pump, reservoir jar, transfer lid, storage lid, 4x lengths of 6mm ID tubing, 1x length of 4mm ID tubing adaptor. Set of brake bleeding adaptors, rubber cup adaptor.
Maximum vacuum: 550mm Hg.
Reservoir capacity: 150ml.

Vacuum Testing & Brake Bleeding Kit

VACUUM TESTING & BRAKE BLEEDING KIT

BRAKE PISTON WIND BACK KIT RIGHT HAND 12-PCE

8mm hexagon key. 140mm handle for optimum leverage and grip. Suitable for disc brake caliper retaining bolts on many modern cars. Manufactured from chrome vanadium steel with corrosion resistant phosphated finish.

Brake Pad Key

BRAKE PAD KEY

Removes and replaces T-slot anti-rattle spring washers found in drum brake assemblies. Hardened and tempered carbon steel shank and cup with oxidised finish for protection against corrosion, bevelled and notched cup fits 16 - 22mm (5/8" - 7/8") diameter. Impact resistant square section handle for secure grip even when greasy. 
Overall length: 152mm (6").

This brake spring washer tool removes and replaces T-slot anti-rattle spring washers found in drum brake assemblies. Easy to handle and reliable, this tool provides consistent results throughout its long lifespan. 

Features and Benefits
• Hardened and tempered carbon steel shank and cup with oxidised finish for protection against corrosion
• Versatile bevelled and notched cup fits 16 - 22mm (5/8" - 7/8") diameter
• Impact resistant square section handle for secure grip - even when greasy

Notes
• Overall length: 152mm (6")

Brake Spring Cup Washer Tool

BRAKE SPRING WASHER TOOL

Laser Tools

This brake disc measurement gauge is designed to measure the thickeness of brake discs with the wheels still on the vehicle, for quick and easy application in garages and automobile workshops. 

Features and Benefits 
• Fits easily to most digital vernier with quick and simply application 
• Ensures most accurate quoting without the need to remove wheels or strip brakes

Typical Application 
• Designed for brake disc measurement in garages and vehicle workshops 


Brake Disc Measurement Gauge

















Sykes-Pickavant

One man operation, the non-return valve ensures air does not return back into the system. Capacity: 500ml.

660500 Brake bleeder - a must have for garages and automotive repair centres.

Features and Benefits
• Easy-to-use - one man operation
• The non-return valve ensures air does not return back into the system
• Large capacity - 500ml

Brake & Clutch Tools

Kennedy

PNEUMATIC FLUID EXTRACTOR 10LTR

Alba Diagnostics

ALB30558 VACUUM BRAKE BLEEDER KIT

Alba Diagnostics

ALB30570 HAND/OP. PRESSURE BRAKE BLEEDER

Draper

24317 BRAKE & HEADLIGHT SPRING HOOK

Kennedy

BRAKE FLUID TESTER AAA 1.5V

Kennedy

BRAKE PISTON WIND BACK KIT UNIVERSAL 18-PCE

2 Variations

Kennedy

DISC BRAKE SPREADER

Kennedy

BRAKE PEDAL DEPRESSOR

Kennedy

1LTR BRAKE BLEEDER & FLUID EXTRACTOR

Kennedy

VACUUM TESTING & BRAKE BLEEDING KIT

Kennedy

BRAKE PISTON WIND BACK KIT RIGHT HAND 12-PCE

2 Variations

Kennedy

BRAKE PAD KEY

Kennedy

BRAKE SPRING WASHER TOOL

Laser Tools

Brake Disc Measurement Gauge

Sykes-Pickavant

660500 BRAKE BLEEDER

Key Information

Group Policies

© 2024 TED. All rights reserved.
Producer Register Limited Number: IE01113WB

Brake & Clutch Tools

Kennedy

PNEUMATIC FLUID EXTRACTOR 10LTR

Alba Diagnostics

ALB30558 VACUUM BRAKE BLEEDER KIT

Alba Diagnostics

ALB30570 HAND/OP. PRESSURE BRAKE BLEEDER

Draper

24317 BRAKE & HEADLIGHT SPRING HOOK

Kennedy

BRAKE FLUID TESTER AAA 1.5V

Kennedy

BRAKE PISTON WIND BACK KIT UNIVERSAL 18-PCE

2 Variations

Kennedy

DISC BRAKE SPREADER

Kennedy

BRAKE PEDAL DEPRESSOR

Kennedy

1LTR BRAKE BLEEDER & FLUID EXTRACTOR

Kennedy

VACUUM TESTING & BRAKE BLEEDING KIT

Kennedy

BRAKE PISTON WIND BACK KIT RIGHT HAND 12-PCE

2 Variations

Kennedy

BRAKE PAD KEY

Kennedy

BRAKE SPRING WASHER TOOL

Laser Tools

Brake Disc Measurement Gauge

Sykes-Pickavant

660500 BRAKE BLEEDER

Key Information

Group Policies

© 2024 TED. All rights reserved.Producer Register Limited Number: IE01113WB

© 2024 TED. All rights reserved.
Producer Register Limited Number: IE01113WB