Clamp Meters

Measuring & Test Equipment

ac_voltagev

acdc_currenta

dc_voltagev

brand

categoryId

stockStatus

Electrical Testing Equipment

Beha Amprobe

ACD-10 TRMS-Plus Clamp-On Multimeter
Amprobe’s ACD-10 TRMS-PLUS meter offer thinner jaws over standard clamp meters. Allowing access to tight measurement areas and still accommodating conductors up to 25mm. Also measures capacitance and frequency. Frequency is measured by either jaws or test leads. Very versatile clamp multimeter. True RMS version for noisy measurement environments for a more accurate reading.
Voltage max: AC/DC voltage to 600V.
Current max: 600A AC.
Jaws only 10mm thick.
Resistance: 40MW.
Continuity buzzer.
Capacitance: 3000mF.
Frequency measurement. In rush current. Hold and maximum reading functions. Accommodates conductors up to 26mm in diameter. Auto ranging. Auto power off. Test leads, battery, soft carrying pouch, users manual.

Amprobe's ACD-10 TRMS-PLUS meter offer thinner jaws over standard clamp meters. Allowing access to tight measurement areas and still accommodating conductors up to 25mm. Also measures capacitance and frequency. Frequency is measured by either jaws or test leads. Very versatile clamp multimeter. True RMS version for noisy measurement environments for a more accurate reading.
Voltage max: AC/DC voltage to 600V.
Current max: 600A AC.
Jaws only 10mm thick.
Resistance: 40MW.
Continuity buzzer.
Capacitance: 3000mF.
Frequency measurement. In rush current. Hold and maximum reading functions. Accommodates conductors up to 26mm in diameter. Auto ranging. Auto power off. Test leads, battery, soft carrying pouch, users manual.

ACD-10 TRMS-Plus Clamp-On Multimeter

ACD-10 PLUS CLAMP METER

Megger

The DCM310 and DCM320 are ideal clamp meters for use during the installation, maintenance and checking of electrical systems and equipment.

The large clamp jaw enables cables to be measured up to 27 mm diameter, so covering the majority of applications within the electrical system installation industry.

• Measures up to 400 A a.c. with low current ranges for improved resolution.
• 600 V a.c./d.c. DCM320.
• 20 MΩ Resistance DCM320.
• Data Hold.
• Max Hold DCM310.
• Small pocket-size design.
• Exceptional battery lifetime.
• Supplied with carry case.
• IEC61010 CAT III 600 V.

DCM310 & DCM320 Digital Clamp Meters

DCM320 Digital Clamp Meter  600V a.c & d.c; 20 MΩ

The DCM340 is a highly versatile instrument and ideal for use in the installation, maintenance, monitoring or checking of a.c. or d.c. electrical systems and equipment.

The DCM340 is safety rated to IEC 61010-1 Cat III 600 V, and is drop-tested to 1.2 m onto a hard floor. 

• DC and AC current and voltage.
• 600A and 600V.
• Resistance and continuity.
• 31/2 digit, 4,000 count display with backlight.
• High resolution digital bargraph.
• Peak, min/max and data-hold functions.
• Zero-offset REL mode for comparative measurements.
• Supplied complete with test leads and carry case.
• IEC61010 CAT III 600V.


DCM340 Digital Clamp Meter

Fluke

TS-600
4mm detachable probes, instruction sheet, continuity beeper, rugged enough to withstand 30m (10ft) drop. Features include continuity and auto power off.
Voltage max: 600V, 600V DC.
Current max: 100A.
Resistance max: 1000W.
Safety rating: Cat III.

Test for Voltage, Current & Resistance/Continuity
The fast and easy solution to basic electrical testing.
Fixed fork OpenJaw™ measures ac current to 100A without breaking the circuit.
Measure ac/dc voltage to 600V or 1000V.
Measure Resistance to 1000W.
Continuity buzzer.
GS38 probe tip covers.
2 year warranty.
Model T5-600
ac/dc voltage 
to 600V.
Cat III-600V 
safety rated

T5-600 Voltage/Continuity Tester

T5-600 ELECTRICAL TESTER VOLT, CONTINUITY, CURRENT 

Martindale Electric

The new pocket sized high performance TRMS AC/DC Clamp meter measuring AC and DC current up to 600A, AC/DC voltage and resistance with continuity test. The compact rugged design enables accurate and reliable DC current measurements down to 10mA resolution in applications including PV installations, battery monitoring and electric vehicles.
The TRMS capability ensures accurate and reliable AC current and voltage measurement for distorted waveforms caused by today's power electronics and non-linear loads found in modern lighting and power supplies.

• TRUE RMS measurement
• AC & DC current
• Auto-ranging 60.00A & 600.0A
• AC/DC voltage to 600V
• Resistance to 1000Ω
• Continuity test <40Ω
• Min / Max readings
• Auto power off & low battery indicator
• Liquid crystal display
• Display backlight

CM79 AC/DC TRMS Clamp Meter

CM79  60A / 600A TRMS AC/DC CLAMP METER

Oxford

The UT220 is a 1999 count AC&DC digital clamp meter that can ensure stable performance, higher degree of safety and reliability to users. It is designed with over-load protection for all ranges, perfect for all professionals measuring currents up to 2000A.

Notes
• Battery not included

Clamp Meters

Beha Amprobe

ACD-10 PLUS CLAMP METER

Megger

DCM320 Digital Clamp Meter 600V a.c & d.c; 20 MΩ

Megger

DCM340 Digital Clamp Meter

Fluke

T5-600 ELECTRICAL TESTER VOLT, CONTINUITY, CURRENT

Martindale Electric

CM79 60A / 600A TRMS AC/DC CLAMP METER

Oxford

AUTO RANGE DIGITAL CLAMPMETER2000A AC/DC

Key Information

Group Policies

© 2024 TED. All rights reserved.
Producer Register Limited Number: IE01113WB

Clamp Meters

Beha Amprobe

ACD-10 PLUS CLAMP METER

Megger

DCM320 Digital Clamp Meter 600V a.c & d.c; 20 MΩ

Megger

DCM340 Digital Clamp Meter

Fluke

T5-600 ELECTRICAL TESTER VOLT, CONTINUITY, CURRENT

Martindale Electric

CM79 60A / 600A TRMS AC/DC CLAMP METER

Oxford

AUTO RANGE DIGITAL CLAMPMETER2000A AC/DC

Key Information

Group Policies

© 2024 TED. All rights reserved.Producer Register Limited Number: IE01113WB

© 2024 TED. All rights reserved.
Producer Register Limited Number: IE01113WB