Materials

Chalk & Plasticine

Engineering Materials

Ground Flat Stock

Key Steel

Packing Shim

Rubber Sheeting

Sand

Silver Steel

Materials, Maintenance & Standard Parts

application

colour

diameter

height

length

lengthmm

mat_material

material

material_form

matting_type

overall_lengthm

overall_thicknessmm

overall_widthm

product_type

specification

thickness

thicknessmm

width

widthmm

brand

categoryId

stockStatus

newProduct

Suited for a host of uses, this economical box of 144, pure white, flat french chalk, is the simple way to quickly and efficiently make temporary markings on a variety of materials. Supplied pre-cut and ready to work.

Features and Benefits
• Supplied in pre-cut chalk flats allowing you to get to work instantly 
• Manufactured in a white colour to allow you to see your markings even on darker materials
• Comes as a box of 144 which is more economical than buying individual chalk sticks

Typical Applications
• Ideal for use in a wide variety of industries including construction, clothing manufacturing and tailoring, plumbing, engineering and architectural uses

Flat French Chalk

French Chalk Flat Sticks, White, 125mm, Box of 144

Kennedy

Square – Metric
High grade mild steel. Available in square or rectangular sections. Metric manufactured from: BS4235 Part 7 1972 grade steel equivalent to DIN 6885. 
Inch manufactured from: BS46 PART 7 1958 grade steel. 
Length: 300mm and 12”.
Other sizes available on request.

For the highest quality cut length keysteel, Kennedy® manufactures engineer's keys to British Standard, approved by the Mechanical Engineering Industry, and delivers precision components to suit your needs.

Features and Benefits
• Available in the standard stock length of 300mm (12")
• Made from high-quality mild steel, BS 080M40 (EN8) C45
• Special sizes available on request

Standards
• BS 4235-1:1972 (metric)
• BS 46-1:11958 (imperial)

Form B Square Engineer's Keys, 2mm x 300mm

8mm x 8mm x 300mm SQUARE KEY STEEL SELF COLOUR

6mm x 6mm x 300mm SQUARE KEY STEEL SELF COLOUR

T & A Precision

Tolerances:
Up to 25mm plus 0 - 0.012mm.        
Over 25mm up to and including 50mm plus 0 - 0.0250mm.

This high carbon silver tool steel is the ideal product for manufacturing and forging your own tools from. The high carbon content means it can be hardened to an impressive level, giving your tool a bolstered wear resistance, whilst the chromium content affords your tool with strength and general hardness. Supplied in an annealed state, this range of round silver steel is ready to be machined and can be purchased in varying sizes to suit your needs.

Features and Benefits
• Comes machine ready to save you time preparing the material
• Manufactured from BS1407 steel to allow you to harden your tool to an impressive level
• Supplied in a spheroidised annealed condition to allow you to begin work immediately
• Saves on material wastage as you can purchase the size that best suits your requirements
• Available in a range of metric sizes to ensure you find the correct product diameter and length for your needs

Typical Applications
• Ideal for use when manufacturing tools such as screwdrivers, punches, shafts, axles, pinions, pins, die posts, instrument parts, model parts, taps and drills for mild steel and engraver tools
• Ideal for tool room and engineering purposes

Metric Round Silver Steel

6.0mm Dia. x 13" Silver Steel

20.0mm Dia. x 39" Silver Steel

5mm x 5mm x 300mm SQUARE KEY STEEL SELF COLOUR

Rectangular – Metric
High grade mild steel. Available in square or rectangular sections. Metric manufactured from: BS4235 Part 7 1972 grade steel equivalent to DIN 6885. 
Inch manufactured from: BS46 PART 7 1958 grade steel. 
Length: 300mm and 12”.
Other sizes available on request.

Supplied in rectangular, metric sized bars, this range of key steel is formed from a high grade mild steel, with a self colour. Available to purchase in various sizes to suit your specific application, all bars have a length of 300mm, but vary in terms of width and height.

Features and Benefits
• Available in a range of widths and heights to suit your application
• Saves you time when milling down to size, as the product comes in a smaller and more compact size than sheet metal
• Ensures material wastage is minimal as you can select the size that best suits your application

Typical Applications
• Engineering
• Manufacturing

Standards
• DIN 6885
• BS4235 Part 1 1972

Industrial Rectangular Key Steel, Metric

8 x 7 x 300mm RECTANGULAR KEY STEEL

10.0mm Dia. x 39" Silver Steel

12.0mm Dia. x 13" Silver Steel

16.0mm Dia. x 39" Silver Steel

6.0mm Dia. x 39" Silver Steel

12.0mm Dia. x 39" Silver Steel

16.0mm Dia. x 13" Silver Steel

Indexa

DIN59350
Grade 1.2510 / Bar Length 500mm Precision ground flat stock supplied in 1.2510 Tool Steel, a wide range of Metric sizes are supplied in 500mm lengths. This grade is an oil hardening tool steel supplied in the annealed condition. It offers good durability, gives excellent wear resistance and holds a good cutting edge. With these properties this tool steel is an excellent general purpose grade. Popular applications for 1.2510 tool steel include medium run dies, intricate press tools, drawing punches, broaches, bushings, lathe centres, chuck jaws, master cavity sinking hobs, paper cutting machine knives, plug gauges, thread gauges and precision measuring tools. It is also commonly used in applications such as cams, cloth cutting knives, cold taps, reamers, trimmer dies, tube expander rolls, plastic moulds and woodworking knives, collets, cutting hobs and strip slitting cutters, The thickness (top & bottom) will be supplied in ground condition. Both ends will be supplied sawn cut. Surface Roughness: Max 3.2my. 

Ground Flat Stock Tolerances:
Thickness: -0/+0.05mm 
Width: -0/+0.20mm 
Length: -5/+5.00mm 
Square Bars: -0/+0.10mm 

Manufactured from an excellent all purpose 1.2510/O1 grade tool steel, this range of precision ground flat stock is available to purchase in an array of metric sizes. Supplied in an annealed state with both ends saw cut and all four sides in a ground condition. This tool steel offers excellent durability when oil hardened, as well as possessing a good resistance to wear and tear and the ability to hold a decent cutting edge over time. All available gauge plates are 500mm in length and 12mm in thickness, with only their width varying.

Features and Benefits
• Manufactured from one of the most widely used cold work steels to guarantee a robust product
• Aids in reducing your material wastage and loss as it can be purchased in a variety of sizes to suit your individual needs
• Saves you time as it's quicker to forge a tool from ground flat stock that from a raw material plate
• Offers a high dimensional stability even in temperatures of up to 200°C
• Annealed state allows the tool steel to be easily manipulated into your desired tool shape before being oil hardened

Typical Applications
• Can be used for the production of knives, stamping dies, wood cutting tools or for mould making applications

Notes
• Material Specification:
• Nearest AISI Standard: O1
• Hardness: 230 HB
• Surface Roughness: max. 3.2µm 

Precision Ground Flat Stock O1 Tool Steel, 12mm x 500mm

Ground Flat Stock, 12mm x 40mm x 500mm

Ground Flat Stock, 12mm x 100mm x 500mm

Precision ground flat stock supplied as 1.2510/O1 cold work tool steel, in a wide range of metric sizes. Suitable for oil hardening, these gauge plates are supplied in an annealed condition. They boast good durability, possess excellent wear resistance and hold a good cutting edge even over time. Each piece can be used to manufacture tools that usually face temperatures of up to 200°C, as they have high dimensional stability. This steel can be hardened up to 64HRc. An excellent general purpose grade material, each product comes with both ends saw cut and all four sides ground flat and measures 500mm in length and 15mm in thickness, with their widths varying.

Features and Benefits
• Manufactured from one of the most common cold work tool steels for guaranteed durability and resistance to wear and tear even over time
• Supplied in an annealed state to make it easier for you to manipulate the ground flat stock into your desired tool structure
• Can be oil hardened to increase the already robust nature of the material
• Boasts a high dimensional stability in temperatures up to 200°C, gifting your moulded tools with longevity
• Aims to help reduce material loss and wastage as it's already fit for purpose instead of milling and grinding your tool down from a large raw material plate

Typical Applications
• Can be used for the production of knives, stamping dies, wood cutting tools or for mould making applications

Notes
• Material Specification:
• Nearest AISI Standard: O1
• Hardness: 230 HB
• Surface Roughness: max. 3.2µm 

Precision Ground Flat Stock O1 Tool Steel, 15mm x 500mm

Ground Flat Stock, 15mm x 40mm x 500mm

Available in a wide variety of metric sizes, this range of precision ground flat stock is manufactured from 1.2510/O1 tool steel. Supplied in an annealed state, the product is suitable for oil hardening once it has been forged into your desired tool. Manufactured from one of the most common forms of cold work steel, it boasts durability, excellent wear resistance and also possesses the ability to hold a good cutting edge over time. Both ends of the gauge plate are saw cut and all four surfaces are supplied in a ground condition. Each product measures 500mm and is 20mm thick, but varies in width.

Features and Benefits
• The product saves you time as it removes the need for milling and grinding material down from a large raw material plate
• It allows you to reduce material losses and wastage due to the wide variety of sizes available to suit individual requirements
• The annealed state in which the product is supplied allows for you to easily manipulate the product into your desired tool shape
• Possesses a high dimensional stability in temperatures up to 200°C making it robust
• Manufactured from the most common cold work tool steel to ensure durability, resistance to wear and tear and ease of hardening

Typical Applications
• Can be used for the production of knives, stamping dies, wood cutting tools or for mould making applications

Notes
• Material Specification:
• Nearest AISI Standard: O1
• Hardness: 230 HB
• Surface Roughness: max. 3.2µm

Precision Ground Flat Stock O1 Tool Steel, 20mm x 500mm

Ground Flat Stock, 20mm x 40mm x 500mm

12mm x 12mm x 300mm SQUARE KEY STEEL SELF COLOUR

10 x 8 x 300mm RECTANGULAR KEY STEEL

Bonut Engineering Ltd

Metric Stainless Steel
High grade mild steel. Available in square or rectangular sections. Metric manufactured from: BS4235 Part 7 1972 grade steel equivalent to DIN 6885. 
Inch manufactured from: BS46 PART 7 1958 grade steel. 
Length: 300mm and 12”.
Other sizes available on request.

This range of Metric sized Stainless Steel key steel is ideal for forging tools or small components from. Supplied as rectangular bars, each product masures 300mm in length and varies in thickness to suit your specifications.

Features and Benefits
• Manufactured from high quality stainless steel for durability and resilience
• Saves wasting material, as you can purchase the size that best suits your needs instead of cutting down from sheet material
• Available in a range of metric sizes to suit your requirements

Typical Applications
• Manufacturing
• Construction
• Engineering

Standards
• BS4235 Part 7 1972 grade steel equivalent to DIN 6885

Industrial Key Steel, Metric

8mmx7mmx300mm STAINLESS STEEL KEYSTEEL

Tolerances:
Below 1" plus/minus 0.00025".
1" up to and including 2" plus/minus 0.00050".

This high carbon silver tool steel is the ideal product for manufacturing and forging your own tools from. With a typical hardness of 207-237HB with 285HB maximum and a surface finish better than 0.6 microns (25 micro inch) CLA (Centre Line Average), this silver steel is guaranteed to make durable tools. The high carbon content means it can be hardened to an impressive level, giving your tool a bolstered wear resistance, whilst the chromium content affords your tool with strength and general hardness. Supplied in an annealed state, this range of round silver steel is ready to be machined and can be purchased in varying imperial sizes to suit your needs.

Features and Benefits
• Comes machine ready to save you time preparing the material, you can get to work right away
• Manufactured from a high grade  steel to allow you to harden your tool to an optimum level
• Supplied in a spheroidised annealed condition to allow you to begin work immediately
• Saves on material wastage as you can purchase the size that best suits your requirements
• Available in a range of imperial sizes to ensure you find the correct product diameter and length for your needs

Typical Applications
• Ideal for use when manufacturing tools such as screwdrivers, punches, shafts, axles, pinions, pins, die posts, instrument parts, model parts, taps and drills for mild steel and engraver tools
• Engineering
• Workshops
• Tool Manufacturing

Standards
• BS1407:1970

Notes
• Chemical analysis: 
Carbon: Range: 0.95 - 1.25%. Typical: 1.13%
Silicon: Range: 0.40% max. Typical: 0.22%
Manganese: Range: 0.25 - 0.45%. Typical: 0.37%
Phosphorous: Range: 0.045% max. Typical: 0.014%
Sulphur: Range: 0.045% max. Typical: 0.018%
Chromium: Range: 0.35 - 0.45%. Typical: 0.43%

Materials

Key Information

Group Policies

© 2024 TED. All rights reserved.
Producer Register Limited Number: IE01113WB

Materials

Key Information

Group Policies

© 2024 TED. All rights reserved.Producer Register Limited Number: IE01113WB

© 2024 TED. All rights reserved.
Producer Register Limited Number: IE01113WB