Engineering Materials

Materials, Maintenance & Standard Parts

diameter

length

material

material_form

specification

thickness

width

brand

categoryId

stockStatus

Materials

Indexa

These brass round bars are manufactured from a brass alloy CZ121 / CW614N that is primarily used for machining. Each bar has Lead added to the composition to improve machinability. The Lead remains insoluble in the microstructure of the brass and the soft particles act as chip breakers. Available in two diametersm with both products measuring 500mm in length.

Features and Benefits
• The most widely used of all the brasses due to its suitability for high speed machining operations and also the manufacture of intricate parts
• The highest machinability of any copper alloy, excellent hot formability and good corrosion resistance
• Available in two sizes to suit your requirements
• Both products possess good conductivity, corrosion resistance and spark resistance for all around durability

Typical Applications
• Typically used for a wide variety of machined components made on high speed lathes including screws, bolts, nuts, bushing, pins, washers,
butts, hinges and also locks and components for watches

Notes
• Cold working is poor and is not recommended with these bars

Brass Round Bars, 500mm Long

8MMx500MM BRASS ROUND BARCW614N/CZ121 (1 PCE)

10MMx500MM BRASS ROUND BARCW614N/CZ121 (1 PCE)

Brass alloy CZ121 / CW614N is used for machining. It has Lead added to the composition to improve machinability. The Lead remains insoluble in the microstructure of the brass and the soft particles act as chip breakers.

• The most widely used of all the brasses due to its suitability for high speed machining operations and also the manufacture of intricate parts.

• The highest machinability of any copper alloy, excellent hot formability and good corrosion resistance.

• Typically used for wide variety of machined components made on high speed lathes including screws, bolts, nuts, bushing, pins, washers,
butts, hinges and also locks and components for watches.

Brass Round Bar x 500mm

25mm x 500mm Brass Round Bar CW614N / CZ121- 1 PCE

Brass Bar Flat x 24in

1/2in x 1/4in x 24in Brass Bar Flat CW614N / CZ121 - 4 Pcs

Brass Bar Equal Angle, 24in.

1in x 1in x 1/8in x 24in Brass Bar Equal Angle CW614N / CZ121 - 5 Pcs

Brass Bar Hexagon x 24in

1in x 24in Brass Hexagon Bar CW614N/CZ121 -1 Pce

CW614N / CZ121
• The most widely used of all the brasses due to its suitability for high speed machining operations and also the manufacture of
intricate parts.

• The highest machinability of any copper alloy, excellent hot formability and good corrosion resistance.

• Typically used for wide variety of machined components made on high speed lathes including screws, bolts, nuts, bushing, pins, washers, butts, hinges and also locks and components for watches.

Brass Bar Hexagon x 500mm

15mm x 500mm Brass Hexagon Bar CW614N / CZ121 - 5 PCE

Grade 2011
• Excellent machining properties, good anodising capability and reasonable strength levels after heat treatment but has poor corrosion resistance and welding is not recommended.

• Used for mass produced parts manufactured by repetition machining such as fasteners, appliance parts & trim, automotive components and trim, screw machine products, atomizer and hose parts, pipe stems, tube fittings and ordnance.

Aluminium Round Bar Grade 2011 x 24in

1in x 24in Grade 2011 Aluminium Round Bar - 1 Pce

1-1/2in x 24in Grade 2011 Aluminium Round Bar - 1 Pce

Grade 6082
• Medium strength alloy with very good corrosion resistance.

• Additions of magnesium, manganese and silicon enhance the mechanical and corrosion resistance properties.

• Good cold forming properties, ease of joining, good machinability and high mechanical strengths.

• Used for packaging containers, foils, tubes, printing plates, strip for heat exchangers, boiler making, insulation foils, kitchenware, chemical and
food industry equipment containers, ore skips, automotive trim and light reflectors.

Aluminium Round Bar Grade 6082 x 24in

1in x 24in Aluminium Round Bar Grade 6082 - 1 Pce

Engineering Materials

Indexa

8MMx500MM BRASS ROUND BARCW614N/CZ121 (1 PCE)

2 Variations

Indexa

10MMx500MM BRASS ROUND BARCW614N/CZ121 (1 PCE)

2 Variations

Indexa

25mm x 500mm Brass Round Bar CW614N / CZ121- 1 PCE

Indexa

1/2in x 1/4in x 24in Brass Bar Flat CW614N / CZ121 - 4 Pcs

2 Variations

Indexa

1in x 1in x 1/8in x 24in Brass Bar Equal Angle CW614N / CZ121 - 5 Pcs

4 Variations

Indexa

1in x 24in Brass Hexagon Bar CW614N/CZ121 -1 Pce

Indexa

15mm x 500mm Brass Hexagon Bar CW614N / CZ121 - 5 PCE

Indexa

1in x 24in Grade 2011 Aluminium Round Bar - 1 Pce

7 Variations

Indexa

1-1/2in x 24in Grade 2011 Aluminium Round Bar - 1 Pce

7 Variations

Indexa

1in x 24in Aluminium Round Bar Grade 6082 - 1 Pce

7 Variations

Key Information

Group Policies

© 2024 TED. All rights reserved.
Producer Register Limited Number: IE01113WB

Engineering Materials

Indexa

8MMx500MM BRASS ROUND BARCW614N/CZ121 (1 PCE)

2 Variations

Indexa

10MMx500MM BRASS ROUND BARCW614N/CZ121 (1 PCE)

2 Variations

Indexa

25mm x 500mm Brass Round Bar CW614N / CZ121- 1 PCE

Indexa

1/2in x 1/4in x 24in Brass Bar Flat CW614N / CZ121 - 4 Pcs

2 Variations

Indexa

1in x 1in x 1/8in x 24in Brass Bar Equal Angle CW614N / CZ121 - 5 Pcs

4 Variations

Indexa

1in x 24in Brass Hexagon Bar CW614N/CZ121 -1 Pce

Indexa

15mm x 500mm Brass Hexagon Bar CW614N / CZ121 - 5 PCE

Indexa

1in x 24in Grade 2011 Aluminium Round Bar - 1 Pce

7 Variations

Indexa

1-1/2in x 24in Grade 2011 Aluminium Round Bar - 1 Pce

7 Variations

Indexa

1in x 24in Aluminium Round Bar Grade 6082 - 1 Pce

7 Variations

Key Information

Group Policies

© 2024 TED. All rights reserved.Producer Register Limited Number: IE01113WB

© 2024 TED. All rights reserved.
Producer Register Limited Number: IE01113WB