Separators & Coil Spring Compressors

Automotive

capacitymm

maximum_jaw_openingmm

number_of_legs

product_type

brand

categoryId

stockStatus

Automotive Tools

Pullers & Separators

Kennedy

Manufactured from drop forged alloy steel with slim tapered fork jaw for easier access into confined areas. Suitable for use on most car and light commercial vehicle ball joints.

100mm Overall Length - Restricted Access
Designed for use in hard to reach and confined areas. Mainly for use on Asian import cars.

Ball Joint Separators

BALL JOINT SEPARATOR

For removing bearings, gears and bushes from shafts where access with a mechanical puller is restricted. Separators have tapered edge for insertion behind close fitting bearings, gears and bushes. 
Jaw hardness: 42° - 45° HRC.

This range of bearing separators are ideal for removing bearings, gears and bushes from shafts, particularly where access with a mechanical puller is restricted. They have tapered edges for insertion behind close fitting bearings, gears and bushes. 

Features and Benefits
• Jaw hardness: 42° - 45° HRC
• Tapered edges

Typical Applications
• Removing bearings, gears and bushes from shafts

Bearing Separators

50mm BEARING SEPARATOR

Made from cast iron and hardened carbon steel, this kit is designed for the removal of press fit type ball joints without having to remove the control arm from the vehicle. The kit can also be used for removing brake anchor pins and the servicing of universal joint bearings.
 Set Includes all the receive tubes and removing/installing adapters needed for press fit parts such as ball joints, universal joints and truck brake anchor pins.

This tool kit is designed for servicing universal joints on all cars and light trucks that have press-fit type ball jointswithout the need to remove the control arm from the vehicle

Contents:
1 x C-frame press and Forcing Screw.
3 x Receiver tubes: 2-3/4" x 3" / 2-1/4" x 2-1/2" / 1-3/4" x 2"
Installation/Removal  Adaptor & Cups
4-wheel drive ball joint service kit for 1967-present 1/2 & 3/4 ton vehicles with Dana 44 front axle, (eg: Ford, GM, Dodge, IHC & Jeep).

This servicing kit is ideal for the removal of press fit type ball joints without needing to remove the control arm from the vehicle. It is made from cast iron and hardened carbon steel for good durability. The kit can also be used for removing brake anchor pins and the servicing of universal joint bearings.

Features and Benefits
• Cast iron and hardened carbon steel build
• Easy removal and servicing of applicable components
• Long lasting, easy to use tools

Typical Applications
• Servicing universal joints on all cars and light trucks
• Removal of ball joints

Ball Joint Servicing Kit

BALL JOINT SERVICE TOOL SET WITH 4X4 ADAPTOR

UNIVERSAL BALL JOINT REMOVER

Hardened steel screws and cast steel claws.

2 Legged
Central hexagonal drive with wrap over coil claws which can be reversed for spreading applications. Suitable for use on cars and light commercial vehicles. 
Use with 21mm/13/16” AF open ended spanner. 
Maximum jaw opening: 250mm. 

3 Legged
Each leg has one free moving claw and one threaded claw with a 1/2” square drive or 24mm hexagon drive - can be used with air tools or spanners. Fitted with safety hooks to prevent accidental release. Suitable for use on cars and commercial vehicles and allows safe compression of heavier springs. 
Maximum jaw opening: 240mm.

Spring Compressor Sets

SPRING COMPRESSOR SET - 2 LEGGED

SPRING COMPRESSOR SET - 3 LEGGED

75mm BEARING SEPARATOR

105mm BEARING SEPARATOR

150mm BEARING SEPARATOR

Contents: 1 x 7" thrust bolt. 1 x 30-50mm separator. 1 x 50-75mm separator. 2 x 80 & 100mm main rods. 2 x 90 & 110mm. extension rods. 1 x beam.

30 - 75mm 
For removing bearings, gears, sprockets and bushes. Metal storage case.
Contents:
1x 7” thrust bolt.
1x 30 - 50mm separator.
1x 50 - 75mm separator.
2x 80 and 100mm main rods.
2x 90 and 110mm extension rods.
1x beam.

Mechanical Separator Set

MECHANICAL BEARING SEPARATOR SET 30-75mm

Sykes-Pickavant

Strengthened steel body and forks. The longer length allows greater force to be applied to separate the ball joint, can be used from outside the wing. 
Throat depth: 88mm. Overall length: 420mm.

Heavy Duty Ball Joint Separator

080600 BALL JOINT SEPARATOR

Strong, heavy duty body, with strengthened fork and lever, allows for greater force to be applied. Can be upgraded to hydraulic power (use Sykes Pickavant 08075000 Upgrade Kit)
Throat depth: 50mm.
Throat width: 36mm.

A tough ball joint separator that can be upgraded to hydraulic power (using Sykes Pickavant 08075000 Upgrade Kit)

Features and Benefits
• Strong, heavy duty body
• Strengthened fork and lever
• Can be upgraded to hydraulic power

Notes
• Throat depth: 50mm
• Throat width: 36mm

Ball Joint Separator - HGV

080700 BALL JOINT SEPARATOR

660490 Throat depth: 69mm. Overall length: 195mm.

Tapered steel jaw, for quick and easy use on most cars and light vans.
Throat depth: 69mm. Overall length: 195mm.


Separators & Coil Spring Compressors

Kennedy

BALL JOINT SEPARATOR

2 Variations

Kennedy

50mm BEARING SEPARATOR

4 Variations

Kennedy

BALL JOINT SERVICE TOOL SET WITH 4X4 ADAPTOR

Kennedy

UNIVERSAL BALL JOINT REMOVER

2 Variations

Kennedy

SPRING COMPRESSOR SET - 2 LEGGED

2 Variations

Kennedy

SPRING COMPRESSOR SET - 3 LEGGED

2 Variations

Kennedy

75mm BEARING SEPARATOR

4 Variations

Kennedy

105mm BEARING SEPARATOR

4 Variations

Kennedy

150mm BEARING SEPARATOR

4 Variations

Kennedy

MECHANICAL BEARING SEPARATOR SET 30-75mm

Sykes-Pickavant

080600 BALL JOINT SEPARATOR

Sykes-Pickavant

080700 BALL JOINT SEPARATOR

Sykes-Pickavant

660490 BALL JOINT REMOVER

Key Information

Group Policies

© 2024 TED. All rights reserved.
Producer Register Limited Number: IE01113WB

Separators & Coil Spring Compressors

Kennedy

BALL JOINT SEPARATOR

2 Variations

Kennedy

50mm BEARING SEPARATOR

4 Variations

Kennedy

BALL JOINT SERVICE TOOL SET WITH 4X4 ADAPTOR

Kennedy

UNIVERSAL BALL JOINT REMOVER

2 Variations

Kennedy

SPRING COMPRESSOR SET - 2 LEGGED

2 Variations

Kennedy

SPRING COMPRESSOR SET - 3 LEGGED

2 Variations

Kennedy

75mm BEARING SEPARATOR

4 Variations

Kennedy

105mm BEARING SEPARATOR

4 Variations

Kennedy

150mm BEARING SEPARATOR

4 Variations

Kennedy

MECHANICAL BEARING SEPARATOR SET 30-75mm

Sykes-Pickavant

080600 BALL JOINT SEPARATOR

Sykes-Pickavant

080700 BALL JOINT SEPARATOR

Sykes-Pickavant

660490 BALL JOINT REMOVER

Key Information

Group Policies

© 2024 TED. All rights reserved.Producer Register Limited Number: IE01113WB

© 2024 TED. All rights reserved.
Producer Register Limited Number: IE01113WB