Shanks & Attachments

Welding, Brazing & Soldering

fuel_type

hose_connection_size

product_type

suitable_for_use_with

categoryId

stockStatus

Gas Welding

Nozzle mixing and backfire resistant nozzles. For general workshop cutting up to 250mm (10"). Use ANM/PNM nozzles below. 18" (450mm) has 90° head.

This 18" 90° head Wescol style gas cutting blowpipe is suited for use with oxygen or fuelgas. With the ability to cut steel up to 250mm, the product is suited for use with ANM (acetylene) and PNM (propane) nozzles. Possesses a hose connection of 3/8" BSP. 

Features and Benefits
• Able to cut steel up to 250mm in thickness making it a hardy product
• Can be adapted to your needs with the purchase of ANM or PNM nozzles (sold separately)
• Backfire resistant to allow you to cut safely

Typical Applications
• Cutting Steel
• Gas Cutting of Metals

Cutting Blowpipe 

Blowpipe, NM Style Cutting torch, 3/8", Acetylene/Oxygen/Propane

(Unbranded)

 A 200mm bent neck suitable for Acetylene Heating Nozzles. For use with Acetylene mixers only


Bent Neck - A-HT Nozzles.

1150 Bent Neck - A-HT Nozzles.

Bent Necks for use with Propane. Suitable for Propane heating nozzles and Type 5 Propane mixers only. 

Stainless Steel Bent Necks - Propane

1151 12" BENT NECK

1152 28" BENT NECK

Attaches to the type 5 gas shank. Suitable for heating using H series propane nozzles, can be used with either 12" or 28" bent neck.  

Type 5 Propane Mixer

2014 (1153) PROPANE MIXER

Shank
Dual-purpose - can be used with welding mixer and nozzles or with cutting attachment.

Lightweight Welding Shank

2004 D/H SHANK WELD/CUT BLOWPIPE

For use with lightweight shank, above, and AFN nozzles (left).

Light weight D/H cutting attachment, for use with Oxygen & Acetylene. 

Features and Benefits:
•Cutting capability between 6-50mm when fitted to a D/H Light weight type shank
•Accepts standard AFN nozzles

D/H Cutting Attachment

For use with lightweight shank, right, and welding nozzles, below.

Acetylene Welding Mixer

2006 D/H MIXER

Heavy duty welding between 1 to 25mm and acetylene cutting to 200mm. For a wide range of oxygen fuel gas processes, using appropriate accessories such as welding mixer and nozzles or with cutting attachment. Made to EN ISO 5172.

This welding shank is ideal for heavy duty welding between 1 to 25mm and acetylene cutting to 200mm. The product is suited for a wide range of oxygen fuel gas processes, using appropriate accessories such as welding mixer and nozzles or with cutting attachment. 

Features and Benefits
• Can be used for oxygen fuel gas processes when using the product with appropriate accessories such as a welding mixer and nozzles (sold separately)
• Suited for heavy duty welding
• Also can perform acetylene cutting to 200mm for versatility of use

Typical Applications
• Gas Welding

Standards
• EN ISO 5172

Heavy-Duty Welding Shanks

2010 STYLE 5 SHANK

For use with heavy-duty shank, above, and ANM/PNM nozzles, see next page. 

For use with heavy-duty shank, and ANM/ PNM nozzles.

Type 5 Style Cutting Attachment

2011 STYLE 5 CUTTING ATTACHMENT

For use with heavy-duty shank (right), and welding nozzles, below.

2012 STYLE 5 WELDING MIXER

Allows diameters of up to two times the length of the gas tubes to be cut simply and easily. High quality brass body and screws with chrome plated steel centre pin. Compatible with most blowpipes including 1144, 1143, NMC200, NM250, NM400 etc. Also compatible with cutting attachments.

Small Circle Cutting Attachment

2030 SMALL CIRCLE CUTTING ATTACHMENT

Fits onto the nozzle end of the blowpipe, between the head and the cutting nozzle. Offers optimum two-handed control, fitted with a sliding centre device and a roller ball support spigot, ideal for accurately cutting larger diameters. Swing arm is graduated for direct reading of circle diameter (2 x radius). High quality brass head and screws with chrome plated steel swing arm and centre slide. 
Compatible with most blowpipes including 1144, 1143, NMC200, NM250, NM400 etc. 
Also compatible with cutting attachments.

Shanks & Attachments

SWP

Blowpipe, NM Style Cutting torch, 3/8", Acetylene/Oxygen/Propane

(Unbranded)

1150 Bent Neck - A-HT Nozzles.

(Unbranded)

1151 12" BENT NECK

2 Variations

(Unbranded)

1152 28" BENT NECK

2 Variations

(Unbranded)

2014 (1153) PROPANE MIXER

(Unbranded)

2004 D/H SHANK WELD/CUT BLOWPIPE

(Unbranded)

D/H Cutting Attachment

(Unbranded)

2006 D/H MIXER

SWP

2010 STYLE 5 SHANK

(Unbranded)

2011 STYLE 5 CUTTING ATTACHMENT

(Unbranded)

2012 STYLE 5 WELDING MIXER

(Unbranded)

2030 SMALL CIRCLE CUTTING ATTACHMENT

(Unbranded)

2031 LARGE CIRCLE CUTTING ATTACHMENT

Key Information

Group Policies

© 2024 TED. All rights reserved.
Producer Register Limited Number: IE01113WB

Shanks & Attachments

SWP

Blowpipe, NM Style Cutting torch, 3/8", Acetylene/Oxygen/Propane

(Unbranded)

1150 Bent Neck - A-HT Nozzles.

(Unbranded)

1151 12" BENT NECK

2 Variations

(Unbranded)

1152 28" BENT NECK

2 Variations

(Unbranded)

2014 (1153) PROPANE MIXER

(Unbranded)

2004 D/H SHANK WELD/CUT BLOWPIPE

(Unbranded)

D/H Cutting Attachment

(Unbranded)

2006 D/H MIXER

SWP

2010 STYLE 5 SHANK

(Unbranded)

2011 STYLE 5 CUTTING ATTACHMENT

(Unbranded)

2012 STYLE 5 WELDING MIXER

(Unbranded)

2030 SMALL CIRCLE CUTTING ATTACHMENT

(Unbranded)

2031 LARGE CIRCLE CUTTING ATTACHMENT

Key Information

Group Policies

© 2024 TED. All rights reserved.Producer Register Limited Number: IE01113WB

© 2024 TED. All rights reserved.
Producer Register Limited Number: IE01113WB