Inserts & Blades

Explore our wide selection of high-quality inserts and blades for cutting tools at Cromwell UK. Find the right inserts and blades for your cutting needs.

Inserts and Blades | Cutting Tools | Cromwell UK

Cutting Tools

blade_heightmm

blade_lengthmm

blade_type

cutting_application

cutting_direction

cutting_location

grooving_widthmm

insert_style

iso_category_grade

manufacturer_grade

material

maximum_grooving_widthmm

minimum_grooving_widthmm

number_of_pockets

radius_type

series

brand

categoryId

stockStatus

rangeable_corner_radiusmm

newProduct

Parting & Grooving

Parting Inserts

Iscar

TAG N-C/W/M parting and grooving inserts are the first choice for the parting of bars, hard materials and tough applications. A positive rake, single cavity (except 7 & 12 mm with double cavity), negative land and shoulders, provides extra cutting-edge strength. Suitable for use with medium-to-high feeds. 

Features and Benefits
• Hard substrate construction for improved rigidity and strength
• Excellent chipping resistance properties 
• TiAlN PVD coating provides high wear and oxidation resistance

Specifications
• Grade : IC908
• ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K40)
• ISO Range - H/S/N: (H10-H20)(S10-S25)
• Grade or Coating Type: PVD
• Coating Layers: TiAlN

Typical Applications
• Milling 
• Steel 


TAG N-C Parting And Grooving Inserts Grade IC908

TAG N3C Insert Grade IC90 8

Sandvik Coromant

QD-NG CoroCutⓇ QD Parting Inserts

Insert Grade 1105

QD-NG CoroCutⓇ QD Parting Inserts Grade 1105

QD-NG-0300-0002-CM INSERT GRADE 1105

First choice for the parting of bars, hard materials and tough applications. A positive rake, single cavity with negative land and shoulders, provides extra cutting-edge strength, medium-to-high feeds.

IC808 Grade Description:
(P15-P30/M20-M30/K20-K40/ S15-S25/N15-N25/H20-H30) SUMO TEC TiAlN PVD coated. A tough submicron substrate. For machining heat resistant alloys, austenitic stainless steel, hard alloys and carbon steel at medium to high cutting speeds. Excellent notch wear and built-up edge resistance.

Parting and Grooving Single-Ended Inserts for Parting Bars, Hard Materials and 
Tough Applications. The TAG inserts are available with the familiar J- and C-Type chipformers, with neutral and angular frontal cutting edges. The new tools are equipped with a user-friendly clamping and extraction device. The TANG-GRIP family includes square shank tools, blades and inserts in 1.4 - 9.5mm widths in the most advanced IC830 and IC808 SUMO TEC grades. The blades are in standard siuzes which fit ISCAR's standard blocks.

Features and Benefits
• Very rigid clamping in a tangentially oriented pocket
• Enables machining at very high feed rates providing excellent straightness and surface finish
• Recommended for parting large diameter parts and for interrupted cuts
• Offers a free, unobstructed chip flow
• Tangential clamping and free chip flow results in improved tool and insert life time
• Provides a solution to the problem of inserts being pulled out during retraction

Standards
• Grade: IC808 

Typical Applications
• Parting
• Grooving

Notes
(1) Larger corner radii for interrupted cut and high feed applications
(2) Tolerance for W<6 mm = ±0.05. For W>6 mm = ±0.10

TAG N-C/W Parting & Grooving Inserts Grade IC808

TAG N3C INSERT GRADE IC808

Parting Blades

The Iscar TGFH part-off blade set contains: 
A double-ended tang-grip blade for parting & grooving.
10x Tag inserts grade IC808.

Grade Description: IC808 (ISO P15-P30, M20-M30, H10-H20, S15-S25)
A hard, fine grain substrate with excellent chipping resistance, combined with a new ?SUMO TEC? TiAlN PVD coating. Provides high wear resistance. Recommended for a very wide range of materials.

These parting and grooving blade inserts enable machining at very high feed rates, while also providing excellent straightness and a smooth surface finish. They offer a free, unobstructed chip flow as there is no upper jaw. The rigid tangential clamping in combination with the free chip flow ensures that the tool has a long product lifespan.

Features and Benefits
• Excels at machining at very high feed rates
• Consistently excellent straightness and surface finish
• Free, unobstructed chip flow
• Long product lifespan

Typical Applications
• Parting large diameter parts
• Interrupted cuts

Parting & Grooving Blades Inserts, Grade IC808

TGFH 26-3C Part-Off Blade Set C/W 10 TAG-3 IC808 Inserts

First choice for soft materials, parting of tubes, small diameters and thin-walled parts. Cutting edge with positive rake. General applications on low carbon steel, alloy steel, austinitic stainless steel. Low-to-medium feed.

IC808 Grade Description:
(P15-P30/M20-M30/K20-K40/ S15-S25/N15-N25/H20-H30) SUMO TEC TiAlN PVD coated. A tough submicron substrate. For machining heat resistant alloys, austenitic stainless steel, hard alloys and carbon steel at medium to high cutting speeds. Excellent notch wear and built-up edge resistance.

TAG N-J/JS/JT 
Parting and grooving inserts
Single-ended insert For Parting - With a vastly improved clamping method.

Features and Benefits 
• Incredibly rigid clamping in a tangentially oriented pocket
• Allows machining at very high feed rates and provides excellent straightness and surface finish
• Recommended for parting large diameter parts - great for interrupted cuts
• Offers a free, unobstructed chip flow - since there is no upper jaw like in other clamping systems (very important in deep grooving and parting applications)
• The combination of tangential clamping and free chip flow results in improved tool and insert life time
• Provides a solution to the problem of inserts being pulled out during retraction

The TAG inserts are available with the familiar J- and C-Type chipformers, with neutral and angular frontal cutting edges. The new tools are equipped with a user-friendly clamping and extraction device. The TANG-GRIP family includes square shank tools, blades and inserts in 1.4 - 9.5mm widths in the most advanced IC830 and IC808 SUMO TEC grades. The blades are in standard siuzes which fit ISCAR's standard blocks.

TAG N-J/JS/JT Parting & Grooving Inserts Grade IC808

TAG N2JT INSERT GRADE IC808

First choice for the parting of bars, hard materials and tough applications. A positive rake, single cavity with negative land and shoulders, provides extra cutting-edge strength, medium-to-high feeds.

IC830 Grade Description:
(P20-P50/M20-M40/K15-K40/ S15-S40) PVD TiAlN coated tough grade followed by a special SUMO TEC surface treatment. Suitable for milling stainless steel, high temperature alloys and other alloy steels. Recommended for interrupted cut and heavy operations.

A tough submicron substrate improved  TiAIN PVD coated grade for better chip 
flow. Designed for machining heat resistant alloys, austenitic stainless steel, hard alloys and carbon steel at medium to high cutting speeds, interrupted cut and unfavourable conditions. Excellent notch wear and built-up edge resistance.

Features and Benefits
• Tough submicron substrate for greater tool hardness
• Excellent notch wear and built-up edge resistance
• TiAIN PVD coated for better chip flow, heat and wear resistance

Typical Applications
• Parting
• Grooving
• Steel
• Stainless steel


TAG N-C/W Parting & Grooving Inserts Grade IC830

TAG N3C INSERT GRADE IC83 0

TAG N3JT INSERT GRADE IC808

Parting Inserts for the GTN System feature a thin PVD coated TiCN layer on a P40 substarte. With high toughness they are ideal for general applications in parting and grooving steel, alloy and stainless steel at medium to high cutting speeds.

Features and Benefits
• High toughness for applications involving steel and steel alloys
• PVD TiCN layer for increased resistance to heat and wear

Standards
• Grade: IC354
• ISO Range - P/M/K: (P20-P40)(M10-M30)


GTN SELF-GRIP Parting Inserts Grade IC354

GTN-2 INSERT GRADE IC354

Parting Inserts for the GTN System.

Grade Name: IC20
Insert Material: CARBIDE - UNCOATED
ISO Range: K10-20 N05-25 S05-20 H05-15
ANSI Range: C2-C3
Grade Description: 'An uncoated carbide grade. Used for semi-finishing, finishing and semi-roughing of aluminum, cast iron and stainless steel. Used at low to medium speeds and feeds.'

Grade Name: IC54
Insert Material: CARBIDE - UNCOATED
ISO Range: P40
ANSI Range: C5
Grade Description: 'Suitable for milling, turning and planing at cutting speeds with large feeds; for machining in unfavorable conditions; permits use of sharp positive angles. Workpiece materials: steel, steel castings with cavities, austenitic stainless steel, stainless steel castings.'

Grade Name: IC328
Insert Material: CARBIDE - PVD COATED
ISO Range: P25-50 M30-40 S25-30
ANSI Range: C5-C6 C2-C3
Coating Description: TiN/TiCN
Grade Description: 'A TiN/TiCN PVD coated tough grade. Used for milling, grooving, parting and drilling a wide range of workpiece materials, at low to medium cutting speeds.'

Grade : IC354
A thin PVD coated TiCN layer on a P40 substarte. High toughness. For general Applications in parting and grooving steel, alloy and stainless steel atmedium to high cutting speeds.
ISO Range - P/M/K: (P20-P40)(M10-M30)
Grade or Coating Type: PVD
Coating Layers: TiCN

Grade : IC50M
Recommended for milling of steel, for semifinishing, semiroughing and roughing with medium or largechip sections and machining in unfavorable conditions.
ISO Range - P/M/K: (P20-P30)(M25-M40)  
Grade or Coating Type: UN-COATED  
Coating Layers: Uncoated

GTN SELF-GRIP Parting Inserts Grade IC328

GTN-3 INSERT GRADE IC328

Self-Grip Parting & Grooving Blades
For all CNC lathes and manual lathes.
For grooves, parting off to center and chamfering.
Easy removal of inserts with extractor.
Multiple lead angles.
Chipbreaker on inserts allows for high speeds and feed rates.

Images are for illustration purposes only.

SGIH 26/32 Self-Grip Parting & Grooving Blades

SGIH-32-3 SELF-GRIP PARTING OFF BLADE

TGFH 32-3C Part-Off Blade Set C/W 10 TAG-3 IC808 Inserts

N151. 2 T-MaxⓇ Q-Cut parting inserts feature a sturdy construction with a PVD TiAlN  coating for increased heat and wear resistance

Features and Benefits
• Grade 1125 construction for finishing applications
• PVD TiAlN  coating for heat and wear resistance
• 4G chipbreaker for effective chip control


N151. 2  T-MaxⓇ Q-Cut Parting Insert Grade 1125

N151.2-300-4E INSERT GRADE 1125

Grooving Inserts

Horn

114 Grooving Inserts

R114.0200.02 INSERT GRADE TN35

First choice for soft materials, parting of tubes, small diameters and thin walled parts. Cutting edge with positive rake. General application on low carbon steel, alloy steel, austenitic stainless steel.

PVD coated roughing grade, interrupted cutting and high resistance to mechanical and thermal shock. Suitable for low speed, high feed applications involving carbon, alloy and stainless steels.

Features and Benefits
• High resistance to mechanical and thermal shock
• PVD TiCN coating for greater durability
• Ideal for low speed and high feed applications

Typical Applications
• Roughing 
• Carbon steel
• Alloy steel
• Stainless steel

Iscar DO-GRIP Parting & Grooving Inserts - IC328 (P25-P50, M30-M50)

Do-Grip, Grooving Insert, DGN 1402J, Grade IC328

First choice for the parting of bars, hard materials and tough applications. A positive rake single cavity with negative hand and shoulders, provides extra cutting-edge strength. Medium to low feeds.

Do-Grip, Grooving Insert, DGN 2002C, Grade IC328

DGN/DGNC/DGNM-C : Used for parting of bars, hard materials and tough applications. A positive rake, single cavity with a negative land and shoulders. Medium-to-high feeds. DGNC - with coolant holes, DGNM - single ended for very deep applications. 

Features and Benefits
• A thin PVD coated TiCN layer on a P40 substrate
• High toughness and durability
• For general applications in parting and grooving steel at medium to high speeds

Specifications
• Grade: IC354
• ISO Range - P/M/K: (P20-P40)(M10-M30)
• Grade or Coating Type: PVD
• Coating Layers: TiCN

Typical Applications
• Parting
• Grooving
• Steel 
• Steel alloys
• Stainless streel


Iscar DO-GRIP Parting & Grooving Inserts Grade IC354

Do-Grip, Grooving Insert, DGN 2002C, Grade IC354

DGN/DGNC/DGNM-C : Used for parting of bars, hard materials and tough applications. A positive rake, single cavity with a negative land and shoulders. Medium-to-high feeds. DGNC - with coolant holes, DGNM - single ended for very deep applications. 

Features and Benefits
• A hard, fine grain substrate with excellent chipping resistance
• New TiAlN PVD coating for added durability
• Provides high wear and oxidation resistance
• Recommended for a wide range of materials applications and machining conditions

Specifications
• Grade: IC908
• ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K40)
• ISO Range - H/S/N: (H10-H20)(S10-S25)
• Grade or Coating Type: PVD
• Coating Layers: TiAlN

Typical Applications
• Parting
• Grooving

Iscar DO-GRIP Parting & Grooving Inserts

Do-Grip, Grooving Insert, DGN 2202C, Grade IC908

Do-Grip, Grooving Insert, DGN 2202J, Grade IC328

TiALN PVD coated grade giving very high toughness for interrupted cutting. Excellent notch wear and built-up edge resistance. Low to medium speed. Suitable for use on carbon, alloy and stainless steels.

Inserts & Blades

Iscar

TAG N3C Insert Grade IC90 8

2 Variations

Sandvik Coromant

QD-NG-0300-0002-CM INSERT GRADE 1105

2 Variations

Iscar

TAG N3C INSERT GRADE IC808

10 Variations

Iscar

TGFH 26-3C Part-Off Blade Set C/W 10 TAG-3 IC808 Inserts

2 Variations

Iscar

TAG N2JT INSERT GRADE IC808

12 Variations

Iscar

TAG N3C INSERT GRADE IC83 0

10 Variations

Iscar

TAG N3JT INSERT GRADE IC808

12 Variations

Iscar

GTN-2 INSERT GRADE IC354

5 Variations

Iscar

GTN-3 INSERT GRADE IC328

2 Variations

Iscar

SGIH-32-3 SELF-GRIP PARTING OFF BLADE

4 Variations

Iscar

TGFH 32-3C Part-Off Blade Set C/W 10 TAG-3 IC808 Inserts

2 Variations

Sandvik Coromant

N151.2-300-4E INSERT GRADE 1125

9 Variations

Horn

R114.0200.02 INSERT GRADE TN35

Iscar

Do-Grip, Grooving Insert, DGN 1402J, Grade IC328

19 Variations

Iscar

Do-Grip, Grooving Insert, DGN 2002C, Grade IC328

19 Variations

Iscar

Do-Grip, Grooving Insert, DGN 2002C, Grade IC354

6 Variations

Iscar

Do-Grip, Grooving Insert, DGN 2202C, Grade IC908

6 Variations

Iscar

Do-Grip, Grooving Insert, DGN 2202J, Grade IC328

19 Variations

Iscar

Do-Grip, Grooving Insert, DGN 2202J, Grade IC908

5 Variations

Iscar

Do-Grip, Grooving Insert, DGN 3102C, Grade IC328

19 Variations

Iscar

Do-Grip, Grooving Insert, DGN 3102C, Grade IC354

6 Variations

Iscar

Do-Grip, Grooving Insert, DGN 3102J, Grade IC328

19 Variations

Iscar

Do-Grip, Grooving Insert, DGN 4003C, Grade IC328

19 Variations

Iscar

Do-Grip, Grooving Insert, DGN 4003C, Grade IC354

6 Variations

Iscar

Do-Grip, Grooving Insert, DGN 4003C, Grade IC908

6 Variations

Key Information

Group Policies

© 2024 TED. All rights reserved.Producer Register Limited Number: IE01113WB

© 2024 TED. All rights reserved.
Producer Register Limited Number: IE01113WB