Multi-Tooth Annular Cutters

Power Tools

cutter_material

cutting_diametermm

depth_of_cut

shank_diameter

shank_type

type

brand

categoryId

stockStatus

Consumables & Accessories

Kennedy

Shank dia.: 19mm/3/4". 
Depth of cut: 50mm. 
Bore: 6mm. 
Overall length: 85mm.

Cutting edge geometry increases cutting performance and reduces cutting forces producing a solid Slug of material which is ejected when the cutter breaks through and the hole is complete. Cutters are faster, easier and are more accurate than the conventional twist drills or drill bits. 

Features and Benefits:
■ Cutters are made of super tough high speed steel (M2 grade) with 3/4" weldon shank compatible with all magnetic drills

■ Accurate, symmetrical, fine finish hole cutting capabilities

■ Reduced friction between the HSS core drill and the material

■ Time and energy savings 

Typical Applications:
■ The ideal choice for all your magnetic drilling & cutting applications. Designed for use in fabrication, construction, railways, petrochemical and any other applications when drilling ferrous metal, structural steel, plate, tubing or material that requires a fine finish hole. 

 




HSS Type Annular Mag Drill Hole Cutter Long

Multi-Tooth Cutter, Long Series, 40mm x 50mm, 10 Teeth, M2 High Speed Steel

Multi-Tooth Cutter, Long Series, 42mm x 50mm, 10 Teeth, M2 High Speed Steel

Multi-Tooth Cutter, Long Series, 44mm x 50mm, 10 Teeth, M2 High Speed Steel

Multi-Tooth Cutter, Long Series, 45mm x 50mm, 10 Teeth, M2 High Speed Steel

Multi-Tooth Cutter, Long Series, 48mm x 50mm, 12 Teeth, M2 High Speed Steel

Multi-Tooth Cutter, Long Series, 49mm x 50mm, 12 Teeth

Multi-Tooth Cutter, Long Series, 50mm x 50mm, 12 Teeth, M2 High Speed Steel

Multi-Tooth Cutter, Long Series, 52mm x 50mm, 12 Teeth, M2 High Speed Steel

Sizes: 14, 16, 18, 20, 22 & 24mm.
Shank diameter: 19mm/3/4". 
Depth of cut: 25mm. 
Bore: 6mm. 
Overall length: 60mm.

Cutting edge geometry increases cutting performance and reduces cutting forces producing a solid Slug of material which is ejected when the cutter breaks through and the hole is complete. Cutters are faster, easier, and more accurate than the conventional twist drills or drill bits. 

Features and Benefits
• Cutters are made of super tough high speed steel (M2 grade) with 3/4" weldon shank compatible with all magnetic drills
• Six piece cutter set complete with pilot pin
• Accurate, symmetrical, fine finish hole cutting capabilities
• Reduced friction between the HSS core drill and the material
• Time and energy savings 

HSS Type Annular Mag Drill Hole Cutter Short - 6 Piece Set 

Multi-Tooth Cutter Set, 14-24mm x 25mm, M2 High Speed Steel

Bore diameter: 20mm. 
Overall length: 156mm.

For use with all multi-tooth cutters with 6mm bore. 

Features and Benefits
• Pilots locate into pre-drilled pilot holes ensuring positional accuracy of the cutter
• Suitable for 'blind' or 'through' pilot holes, pin will retract into cutter adaptor upon bottoming

Notes
• Short series = 77mm
• Long series = 102mm



Pilot Pins

Pilot Pin, 13-52mm x 25mm, Steel

Pilot Pin, 13-52mm x 50mm, Steel

Pilot Pin, 12mm x 25mm, Steel

Pilot Pin, 12mm x 50mm, Steel

For use with Magtron broaching units, drill presses, lathes etc. 
Bore diameter: 20mm. 
Overall length: 156mm.

For use with Mag Base broaching units, Piller Drills, drill presses, lathes etc. 


Morse Taper to Weldon Shank Adaptors

Adaptor No.2 Morse Taper

Adaptor No.3 Morse Taper

Karnasch

Available in a range of diameters, the Karnasch Hard-Line annular cutters are able to drill hardened steel up to 40 Rockwell (HRC) and strength of 1400N 

Features and Benefits
• Available in diameters of 12-150 mm 
• Made with a conical helix for clean chip flow and highest cutting ability even with difficult material
• Exclusively equipped with Sandvik carbide teeth
• Made in an elaborate pre-/intermediate-/after-cutting geometry resulting in clatter free, silent and easy cutting with highest lifetimes

Typical Applications
• Drilling in hardened steel up to 40 Rockwell [HRC] and strength of 1400 N
• Drilling in all sorts of stainless steel
• Drilling in most difficult alloys [Hardox/Inconel/Titan]
• Drilling also excellent in all non-ferrous material such as alu, copper, brass and similar

Hard-Line TCT Annular Cutter, 55mm Depth of Cut


HARD-LINE TCT ANNULAR CUTTER, DEPTH OF CUT 55MM, DIA12MM

HARD-LINE TCT ANNULAR CUTTER, DEPTH OF CUT 55MM, DIA16MM

HARD-LINE TCT ANNULAR CUTTER, DEPTH OF CUT 55MM, DIA17MM

HARD-LINE TCT ANNULAR CUTTER, DEPTH OF CUT 55MM, DIA18MM

HARD-LINE TCT ANNULAR CUTTER, DEPTH OF CUT 55MM, DIA22MM

Rotabroach

To suit Rotabroach Mini Cutters. Complete with pilot and spring. Spare parts also available on request.
Shank sizes: RA117 = 10mm. 
RA116/RA118 = 13mm. (Cutters supplied separately.)

Mini Cutters Arbors

RA116, Mini Cutter Arbor, 1/2"

RA118, Mini Cutter Arbor, 1/2"

For perfect holes in sheet metal, pipes and plastic. Cut clean, burr-free holes in seconds. Mini Cutters produce holes by removing a ‘disc’ of metal and have precision ground teeth and flutes to rapidly remove waste material, so they are fast, smooth and highly accurate. Designed to give higher performance and longer cutting life on stainless steel and other difficult materials. Annular cutting action with no ‘dead centre’ area as with a twist drill. It means that less pressure is required to make the hole, so there is less risk of deforming sheet metal. The highly efficient cutting action ensures minimal burring on breakthrough, reducing or completely eliminating the need for additional finishing work. Last up to 300 times longer than hole saws made from M2 High Speed Steel.

Rotabroach Mini Cutters cut clean, burr-free holes in seconds. 

Features and Benefits:
■ Precision ground teeth and flutes ensure a fast, smooth and accurate cut every time.

■ Precision ground M2 high Speed Steel

■ Over 3 times faster than standard twist drills making them highly economical.

■ Low power consumption giving a long life to cordless drills.

Typical Applications:
■ The professional solution for cutting clean accurate holes in sheet metal, pipes and plastics.



Multi-Tooth Annular Cutters

Kennedy

Multi-Tooth Cutter, Long Series, 40mm x 50mm, 10 Teeth, M2 High Speed Steel

14 Variations

Kennedy

Multi-Tooth Cutter, Long Series, 42mm x 50mm, 10 Teeth, M2 High Speed Steel

14 Variations

Kennedy

Multi-Tooth Cutter, Long Series, 44mm x 50mm, 10 Teeth, M2 High Speed Steel

14 Variations

Kennedy

Multi-Tooth Cutter, Long Series, 45mm x 50mm, 10 Teeth, M2 High Speed Steel

14 Variations

Kennedy

Multi-Tooth Cutter, Long Series, 48mm x 50mm, 12 Teeth, M2 High Speed Steel

14 Variations

Kennedy

Multi-Tooth Cutter, Long Series, 49mm x 50mm, 12 Teeth

14 Variations

Kennedy

Multi-Tooth Cutter, Long Series, 50mm x 50mm, 12 Teeth, M2 High Speed Steel

14 Variations

Kennedy

Multi-Tooth Cutter, Long Series, 52mm x 50mm, 12 Teeth, M2 High Speed Steel

14 Variations

Kennedy

Multi-Tooth Cutter Set, 14-24mm x 25mm, M2 High Speed Steel

Kennedy

Pilot Pin, 13-52mm x 25mm, Steel

4 Variations

Kennedy

Pilot Pin, 13-52mm x 50mm, Steel

4 Variations

Kennedy

Pilot Pin, 12mm x 25mm, Steel

4 Variations

Kennedy

Pilot Pin, 12mm x 50mm, Steel

4 Variations

Kennedy

Adaptor No.2 Morse Taper

2 Variations

Kennedy

Adaptor No.3 Morse Taper

2 Variations

Karnasch

HARD-LINE TCT ANNULAR CUTTER, DEPTH OF CUT 55MM, DIA12MM

6 Variations

Karnasch

HARD-LINE TCT ANNULAR CUTTER, DEPTH OF CUT 55MM, DIA16MM

6 Variations

Karnasch

HARD-LINE TCT ANNULAR CUTTER, DEPTH OF CUT 55MM, DIA17MM

6 Variations

Karnasch

HARD-LINE TCT ANNULAR CUTTER, DEPTH OF CUT 55MM, DIA18MM

6 Variations

Karnasch

HARD-LINE TCT ANNULAR CUTTER, DEPTH OF CUT 55MM, DIA22MM

6 Variations

Rotabroach

RA116, Mini Cutter Arbor, 1/2"

3 Variations

Rotabroach

RA118, Mini Cutter Arbor, 1/2"

3 Variations

Rotabroach

Mini Cutter, 8mm x 6.4mm, 4 Teeth, M2 High Speed Steel

20 Variations

Rotabroach

Mini Cutter, 9mm x 6.4mm, 4 Teeth, M2 High Speed Steel

20 Variations

Rotabroach

Mini Cutter, 10mm x 6.4mm, 4 Teeth, M2 High Speed Steel

20 Variations

Key Information

Group Policies

© 2024 TED. All rights reserved.Producer Register Limited Number: IE01113WB

© 2024 TED. All rights reserved.
Producer Register Limited Number: IE01113WB