Ring Main Fittings

Flow Control

body_material

diameter

pipe_outer_diameter_mm

product_type

thread_bspin

brand

categoryId

stockStatus

Pneumatic Fittings

John Guest

For use with other fittings, converts plain end pipe into male thread.

Stem Adaptors
Converts push-fit to male thread.

Push-fit System - Compressed Air
Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. 
A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. 
All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. 
The system will be ready for use immediately and complex systems much more rapidly than traditional methods. 
Because of the ease of use, this system can be disconnected, altered and extended. 
Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper.

It is recommended that all installations are checked prior to use to determine that a seal has been made. 
The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard.

Working Temperature Range:
Minimum Working Temperature -20°C
Maximum Working Temperature +70°C

Working Pressure:
Temperature: +23°C. Pressure: 10bar.
Temperature: +70°C. Pressure: 7bar.

Tolerances:
Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD.

Maximum Torque Values:
Size: 3/8"  -  Plastic threads: 3.0Nm.  Metal threads: N/A.
Size: 1/2"  -  Plastic threads: 3.0Nm.  Metal threads: 4.0Nm.
Size: 3/4"  -  Plastic threads: 4.0Nm.  Metal threads: 5.0Nm.
Size: 1"     -  Plastic threads: N/A.      Metal threads: N/A.

Push-fit System for Compressed Air - Stem Adaptors

15mmx3/8" BSP RINGMAIN STEM ADAPTOR

These Straight Adaptors re designed to convert from push-fit to threaded connector. The John Guest® Push-fit system provides the ideal connection from compressor to air-line service components through to complete ring main and take off points. Designed for quick installation via the push-in installation, this range of adaptors can be used with most plastic and mild metal pipes. Available in a range of sizes.

Features and Benefits
• Can be used with UPVC, ABS, polyethylene, nylon, mild steel and copper pipes for versatility of use
• Simple push in action to connect the piece for simplicity
• Can easily be disconnected, altered or moved to allow you to use the component in the way that best suits your needs
• Available in a variety of specifications to suit your requirements

Typical Applications
• Plumbing
• DIY
• Engineering

Notes
• Working Temperature Range
Minimum Working Temperature -20°C
Maximum Working Temperature +70°C
• Working Pressure
Temperature: +23°C. Pressure: 10bar
Temperature: +70°C. Pressure: 7bar
• Tolerances
Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD
• Maximum Torque Values
Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A
Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm
Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm
Size: 1". Plastic threads: N/A. Metal threads: N/A
• PM011514E has no thread seal

Push-fit System Straight Adaptors

15mmx3/8" BSP RINGMAIN STRAIGHT ADAPTOR

U-Bend	

Push-fit System - Compressed Air
Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. 
All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. 
Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper.
It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard.

Working Temperature Range
Minimum Working Temperature -20°C
Maximum Working Temperature +70°C

Working Pressure
Temperature: +23°C. Pressure: 10bar.
Temperature: +70°C. Pressure: 7bar.

Tolerances
Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD.

Maximum Torque Values
Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A.
Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm.
Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm.
Size: 1". Plastic threads: N/A. Metal threads: N/A.

Push-fit System for Compressed Air - U-Bend				


15mm RINGMAIN U-BEND

Used with other fittings to reduce pipebore diameter.

These reducers are designed for use with other fittings and pipes to reduce pipe sizes. Available in a range of sizes, these reducers form part of the push fit system that provides easy connection, disconnection and alteration of systems.  Each reducer is suited for use with metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper for versatility.

Features and Benefits
• Push-fit technology makes the product easy to attach to pipes and detach as necessary
• Quick disconnection without the need for tools allowing you to easily adapt the system to suit your changing needs
• Corrosion resistant for overall product longevity
• Available in a range of sizes to suit your needs
• Reduced maintenance and installation times to keep you working and reduce downtime

Typical Applications
• Plumbing
• Engineering
• Construction

Notes
• Working Temperature Range
• Minimum Working Temperature -20°C
• Maximum Working Temperature +70°C
• Working Pressure
• Temperature: +23°C. Pressure: 10bar
• Temperature: +70°C. Pressure: 7bar
• Tolerances
• Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD
• Maximum Torque Values
• Size: 3/8in. Plastic threads: 3.0Nm. Metal threads: N/A
• Size: 1/2in. Plastic threads: 3.0Nm. Metal threads: 4.0Nm
• Size: 3/4in. Plastic threads: 4.0Nm. Metal threads: 5.0Nm
• Size: 1in. Plastic threads: N/A. Metal threads: N/A

Push-Fit Reducer

22mm-15mm RINGMAIN REDUCER

28mm-15mm RINGMAIN REDUCER

28mm-22mm RINGMAIN REDUCER

This fitting is made of the following components:-

The body is produced in brass 
'O'Rings are nitrile rubber 
The collet is produced in acetal copolymer with stainless steel teeth

These Brass Wingback Elbows are designed to allow the user to join, modify or extend a  malleable/galvanised from/to plastic piping. Manufactured from brass with a durable rubber O-ring, the product is suited for use with John Guest®'s push-fit technology ststem.

Features and Benefits
• Push-fit technology makes the product quick and easy to install as well as move around if needed
• Allows for a quick disconnection without the need for tools to reduce downtime
• Quick push-fit system makes a system easy to alter or extend
• Manufactured from durable brass which is also resistant to corrosion for overall product longevity
• Push-fit system makes for reduced maintenance and installation times

Typical Applications
• Plumbing
• Engineering

Notes
• Working Temperature Range
• Minimum Working Temperature -20°C
• Maximum Working Temperature +70°C
• Working Pressure
• Temperature: +23°C. Pressure: 10bar
• Temperature: +70°C. Pressure: 7bar
• Tolerances
• Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD
• Maximum Torque Values
• Size: 3/8in. Plastic threads: 3.0Nm. Metal threads: N/A
• Size: 1/2in. Plastic threads: 3.0Nm. Metal threads: 4.0Nm
• Size: 3/4in. Plastic threads: 4.0Nm. Metal threads: 5.0Nm
• Size: 1in. Plastic threads: N/A. Metal threads: N/A

Ringmain Brass Wingback Elbow

15mmx1/2" BSP RINGMAIN BRASS WINGBACK ELBOW

22mmx3/4" BSP RINGMAIN BRASS WINGBACK ELBOW

This range of equal elbows are designed to connect plain pipe at 90°. With a push-fit system, the products are designed for use with compressed air systems. They are designed to provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. With a working temperature range of -20°C to +70°C, working pressure range of 10 bar up to +23° and 7 bar up to +70°, the range is robust and versatile.

Features and Benefits
• Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper making for a versatle product
• All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent to save you time when working
• Quick disconnection without the need for tools for ease
• Designed to allow for superior air flow
• Suited for air as well as inert gases depending on your needs
• Available in a range of sizes to suit your needs

Typical Applications
• Automotive
• Engineering

Notes
• It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard
• Tolerances:
Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD.
• Maximum Torque Values:
Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A
Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm
Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm
Size: 1". Plastic threads: N/A. Metal threads: N/A

Push-fit System for Compressed Air - Equal Elbows

15mm RINGMAIN EQUAL ELBOW

22mm RINGMAIN EQUAL ELBOW

28mm RINGMAIN EQUAL ELBOW

Used with other fittings to create a 90 angle.

Stem Elbow
Provides a Swivel type connector.

Push-fit System - Compressed Air
Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. 
All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. 
Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper.
It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard.

Designed to simplify pipe connections in restricted spaces, the Stem Elbow gives an instant swivel fitting so a pipe can be orientated in any direction.

Can be used with an elbow to make 'U' turn connection.
Please note a collet cover cannot be used on a Speedfit end assembled with the stem of a 22mm Stem Elbow. Can be used with a Tee.

Working Temperature Range
Minimum Working Temperature -20°C
Maximum Working Temperature +70°C

Working Pressure
Temperature: +23°C. Pressure: 10bar.
Temperature: +70°C. Pressure: 7bar.

Tolerances
Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD.

Maximum Torque Values
Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A.
Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm.
Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm.
Size: 1". Plastic threads: N/A. Metal threads: N/A.

Push-fit System for Compressed Air - Stem Elbow

15mm RINGMAIN STEM ELBOW

22mm RINGMAIN STEM ELBOW

These straight connectors are used to connect pipe end to end. With a push fit system, these fittings provide an ideal connection from compressor to air-line service components through to complete ring main and take off points. The connectors can be installed quickly and easily for convenience. The push in action provides a positive lock without needing to use solvents or sealants and can be disconnected, altered or extended with ease. The product is suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. Possesses a working temperature range of -20°C to +70°C.

Features and Benefits
• Push-fit technology makes for positive locking without the need for solvents or sealants
• Quick disconnection without the need for tools to allow you to make the system work for your needs
• Food Quality and suitable for potable liquids for versatility of safe use
• Suitable for soft metal or plastic tubes and can be used for transporting air as well as inert gases
• Possesses superior flow characteristics

Typical Applications
• Plumbing
• Automotive 

Notes
• Working Pressure:
• Temperature: +23°C. Pressure: 10bar
• Temperature: +70°C. Pressure: 7bar
• Tolerances
• Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD
• Maximum Torque Values
• Size: 3/8in. Plastic threads: 3.0Nm. Metal threads: N/A
• Size: 1/2in. Plastic threads: 3.0Nm. Metal threads: 4.0Nm
• Size: 3/4in. Plastic threads: 4.0Nm. Metal threads: 5.0Nm
• Size: 1in. Plastic threads: N/A. Metal threads: N/A

Straight Connectors

15mm RINGMAIN STRAIGHT CONNECTOR

22mm RINGMAIN STRAIGHT CONNECTOR

28mm RINGMAIN STRAIGHT CONNECTOR

Connects plain pipe end to end and at 90.

This range of Equal Tees is designed to easily join pipes of the same size of nylon, copper or aluminium as well as a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. Designed with a push-fit system, the products provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, with no need to prepare threaded pipe or solvent. The system can be disconnected, altered and extended easily. Available in a variety of sizes to suit your specific needs.

Features and Benefits
• Push-fit technology is simple to use as well as being able to hold pipes firmly in poisition
• Quick disconnection without the need for tools to save you time
• All fittings are of Food Quality and suitable for potable liquids for versatility and safety of use in food applications
• Suitable for soft metal or plastic tubes as well as with air or inert gases for a wide range of suitable applications
• Designed with superior flow characteristics

Typical Applications
• Plumbing

Notes
• Minimum Working Temperature -20°C
• Maximum Working Temperature +70°C
• Working Pressure:
• Temperature: +23°C. Pressure: 10bar
• Temperature: +70°C. Pressure: 7bar
• Tolerances:
• Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD
• Maximum Torque Values:
• Size: 3/8in. Plastic threads: 3.0Nm. Metal threads: N/A
• Size: 1/2in. Plastic threads: 3.0Nm. Metal threads: 4.0Nm
• Size: 3/4in. Plastic threads: 4.0Nm. Metal threads: 5.0Nm
• Size: 1in. Plastic threads: N/A. Metal threads: N/A

Equal Tees

15mm RINGMAIN EQUAL TEE

22mm RINGMAIN EQUAL TEE

28mm RINGMAIN EQUAL TEE

Compressed Air Fittings
This fitting is made of the following components:-

The body is produced in acetal copolymer 
'O'Rings are nitrile rubber 
The collet is produced in acetal copolymer with stainless steel teeth

End Stop 
Provides permanent or temporary shut off.

Push-fit System - Compressed Air
Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. 
All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. 
Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper.
It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard.

Working Temperature Range
Minimum Working Temperature -20°C
Maximum Working Temperature +70°C

Working Pressure
Temperature: +23°C. Pressure: 10bar.
Temperature: +70°C. Pressure: 7bar.

Tolerances
Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD.

Maximum Torque Values
Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A.
Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm.
Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm.
Size: 1". Plastic threads: N/A. Metal threads: N/A.

Ring Main Fittings

John Guest

15mmx3/8" BSP RINGMAIN STEM ADAPTOR

6 Variations

John Guest

15mmx3/8" BSP RINGMAIN STRAIGHT ADAPTOR

7 Variations

John Guest

15mm RINGMAIN U-BEND

John Guest

22mm-15mm RINGMAIN REDUCER

7 Variations

John Guest

28mm-15mm RINGMAIN REDUCER

7 Variations

John Guest

28mm-22mm RINGMAIN REDUCER

7 Variations

John Guest

15mmx1/2" BSP RINGMAIN BRASS WINGBACK ELBOW

2 Variations

John Guest

22mmx3/4" BSP RINGMAIN BRASS WINGBACK ELBOW

2 Variations

John Guest

15mm RINGMAIN EQUAL ELBOW

5 Variations

John Guest

22mm RINGMAIN EQUAL ELBOW

5 Variations

John Guest

28mm RINGMAIN EQUAL ELBOW

5 Variations

John Guest

15mm RINGMAIN STEM ELBOW

4 Variations

John Guest

22mm RINGMAIN STEM ELBOW

4 Variations

John Guest

15mm RINGMAIN STRAIGHT CONNECTOR

5 Variations

John Guest

22mm RINGMAIN STRAIGHT CONNECTOR

5 Variations

John Guest

28mm RINGMAIN STRAIGHT CONNECTOR

5 Variations

John Guest

15mm RINGMAIN EQUAL TEE

5 Variations

John Guest

22mm RINGMAIN EQUAL TEE

5 Variations

John Guest

28mm RINGMAIN EQUAL TEE

5 Variations

John Guest

15mm RINGMAIN STOP END

3 Variations

John Guest

22mm RINGMAIN STOP END

3 Variations

John Guest

15mmx1/2" BSP RINGMAIN STEM ADAPTOR

6 Variations

John Guest

22mmx1/2" BSP RINGMAIN STEM ADAPTOR

6 Variations

John Guest

22mmx3/4" BSP RINGMAIN STEM ADAPTOR

6 Variations

John Guest

22mmx3/4" BSP RINGMAIN STRAIGHT ADAPTOR

7 Variations

Key Information

Group Policies

© 2024 TED. All rights reserved.Producer Register Limited Number: IE01113WB

© 2024 TED. All rights reserved.
Producer Register Limited Number: IE01113WB