Ring Main Fittings

Flow Control

body_material

diameter

pipe_outer_diameter_mm

product_type

thread_bspin

brand

categoryId

stockStatus

Pneumatic Fittings

John Guest

Converts push fit end to male thread.
The body is manufactured from solid brass

Male Brass Stem Adaptor
Converts push fit end to male thread. 

Push-fit System - Compressed Air
Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. 
All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. 
Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper.
It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard.

Working Temperature Range
Minimum Working Temperature -20°C
Maximum Working Temperature +70°C

Working Pressure
Temperature: +23°C. Pressure: 10bar.
Temperature: +70°C. Pressure: 7bar.

Tolerances
Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD.

Maximum Torque Values
Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A.
Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm.
Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm.
Size: 1". Plastic threads: N/A. Metal threads: N/A.

Push-fit System for Compressed Air - Male Brass Stem Adaptor

15mmx1/2" BSPT RINGMAIN M BRASS STEM ADAPTOR

22mmx3/4" BSPT RINGMAIN BRASS STEM ADAPTOR

28mmx1" BSPT RINGMAIN BRASS STEM ADAPTOR

Compressed Air Fittings
This fitting is made of the following components:-

The body is produced in brass 
'O'Rings are nitrile rubber 
The collet is produced in acetal copolymer with stainless steel teeth

This range of brass straight adaptors are an easy way of allowing the user to join, modify or extend a malleable/galvanised from/to plastic piping. With an easy push-fit action and tool-less installation and disconnection. Available in three varying sizes to suit pipe sizes 15, 22 and 28mm.

Features and Benefits
• Push-fit technology is easy to operate and provides a sturdy hold with a collet and stainless steel teeth as well as a nitrile 'o' ring to further prevent leakage
• Brass construction resists corrosion and offers overall durability
• Can be swiftly disconnected without the use of tools for ease
• Available in three varying sizes - for pipe sizes 15, 22 and 28mm -  to ensure you purchase the right product for your requirements 

Typical Applications
• Ideal for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper

Notes
• It is always recommended that installations are checked prior to use to determine that a seal has been made to avoid accidents

Brass Straight Adaptors

15mmx1/2" BSPT RINGMAIN M BRASS STRAIGHT ADAPTOR

22mmx3/4" BSPT RINGMAIN M BRASS STRAIGHT ADAPTOR

28mmx1" BSP RINGMAIN M BRASS STRAIGHT ADAPTOR

Connects plain pipe end to end and smaller diameter pipe at 90.

Reducing Tee
Use with other fittings and pipe to reduce pipe sizes.

Push-fit System - Compressed Air
Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. 
All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. 
Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper.
It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard.

Working Temperature Range
Minimum Working Temperature -20°C
Maximum Working Temperature +70°C

Working Pressure
Temperature: +23°C. Pressure: 10bar.
Temperature: +70°C. Pressure: 7bar.

Tolerances
Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD.

Maximum Torque Values
Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A.
Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm.
Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm.
Size: 1". Plastic threads: N/A. Metal threads: N/A.

Push-fit System for Compressed Air - Reducing Tee

22x22x15mm RINGMAIN REDUCING TEE

These Nylon Hoses are part of the John Guest® push fit system that aims to simplify the installation of pneumatic components. Supplied in three metre lengths, the product can be purchased in a range of varying diameters to suit your requirements.

Features and Benefits
• Manufactured from nylon for ultimate durability and resilience
• Available in a range of sizes to suit your requirements
• Part of the push-fit range that makes for easy installation, simply push in to fit
• Rigid structure is highly robust

Typical Applications
• Plumbing
• Automotive
• Construction

Notes
• Working Temperature Range
• Minimum Working Temperature -20°C
• Maximum Working Temperature +70°C
• Working Pressure
• Temperature: +23°C. Pressure: 10bar
• Temperature: +70°C. Pressure: 7bar
• Tolerances
• Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD
• Maximum Torque Values
• Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A
• Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm
• Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm
• Size: 1". Plastic threads: N/A. Metal threads: N/A

Nylon Hoses

12mmx3M RINGMAIN RIGID NYLON HOSE

Rigid unplasticised nylon pipe. Supplied in 3 metre lengths.

15mmx3M RINGMAIN RIGID NYLON HOSE

22mmx3M RINGMAIN RIGID NYLON HOSE

Prevent accidental removal or tampering with piping.

Collet Covers
Prevent accidental removal or tampering with piping. Can be removed to allow the pipe to be disconnected as and when required.

Push-fit System - Compressed Air
Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. 
All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. 
Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper.
It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard.

Working Temperature Range
Minimum Working Temperature -20°C
Maximum Working Temperature +70°C

Working Pressure
Temperature: +23°C. Pressure: 10bar.
Temperature: +70°C. Pressure: 7bar.

Tolerances
Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD.

Maximum Torque Values
Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A.
Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm.
Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm.
Size: 1". Plastic threads: N/A. Metal threads: N/A.

Push-fit System for Compressed Air - Collet Covers

22mm RINGMAIN COLLET COVER

Compressed air fitting.
This fitting is made of the following components:-

The entire body is produced in acetal copolymer

Plug

Push-fit System - Compressed Air
Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. 
All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. 
Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper.
It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard.

Working Temperature Range
Minimum Working Temperature -20°C
Maximum Working Temperature +70°C

Working Pressure
Temperature: +23°C. Pressure: 10bar.
Temperature: +70°C. Pressure: 7bar.

Tolerances
Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD.

Maximum Torque Values
Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A.
Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm.
Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm.
Size: 1". Plastic threads: N/A. Metal threads: N/A.

Ring Main Fittings

John Guest

15mmx1/2" BSPT RINGMAIN M BRASS STEM ADAPTOR

3 Variations

John Guest

22mmx3/4" BSPT RINGMAIN BRASS STEM ADAPTOR

3 Variations

John Guest

28mmx1" BSPT RINGMAIN BRASS STEM ADAPTOR

3 Variations

John Guest

15mmx1/2" BSPT RINGMAIN M BRASS STRAIGHT ADAPTOR

3 Variations

John Guest

22mmx3/4" BSPT RINGMAIN M BRASS STRAIGHT ADAPTOR

3 Variations

John Guest

28mmx1" BSP RINGMAIN M BRASS STRAIGHT ADAPTOR

3 Variations

John Guest

22x22x15mm RINGMAIN REDUCING TEE

2 Variations

John Guest

12mmx3M RINGMAIN RIGID NYLON HOSE

5 Variations

John Guest

15mmx3M RINGMAIN RIGID NYLON HOSE

5 Variations

John Guest

22mmx3M RINGMAIN RIGID NYLON HOSE

5 Variations

John Guest

22mm RINGMAIN COLLET COVER

2 Variations

John Guest

15mm RINGMAIN BLACK PLUG

5 Variations

John Guest

22mm RINGMAIN BLACK PLUG

5 Variations

John Guest

28mm RINGMAIN BLACK PLUG

5 Variations

John Guest

5x1/2" PORTING BLOCK

Key Information

Group Policies

© 2024 TED. All rights reserved.Producer Register Limited Number: IE01113WB

© 2024 TED. All rights reserved.
Producer Register Limited Number: IE01113WB